Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the U0103 Dodge code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Transmission Control Module (TCM) receives information from the Engine, Anti-lock Brake System, and the Electronic Shift Modules (ESM) over the CAN C bus. The CAN C bus is a high-speed communication bus that allows real-time control capability between various controllers. Most messages are sent every 20 mSec, this means critical information can be shared between multiple controllers almost instantaneously. The CAN C bus is a two-wire bus with a CAN (+) and a CAN (-) circuit. To reduce the potential of radio and other electrical noise interference, the CAN Bus circuit wiring is manufactured using a twisted pair configuration within the electrical wiring harness. The Diagnostic Trouble Code (DTC) will set if a valid CAN ID was not received in the required time from the Electronic Gear Shift Module.
Need more information on how to fix the U0103 Dodge code? Get Access to Factory Service Manuals
Get the U0103 Dodge code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the U0103 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks