AutoCodes – Toyota – U0101 2014 Toyota RAV4

U0101 2014 Toyota RAV4 Code - Lost Communication with Transmission Control Module

Quick Answer

The Transmission Control Module (TCM) and Engine Control Module (ECM) perform 2-way communications with each other via the Controller Area Network (CAN). Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0101 2014 Toyota RAV4 indicates Lost Communication with Transmission Control Module .
Common causes: Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 378

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0101 2014 Toyota RAV4 Description

The Transmission Control Module (TCM) and Engine Control Module (ECM) perform 2-way communications with each other via the Controller Area Network (CAN). The TCM sends signals to the ECM concerning required engine rpm, required engine torques, warning indicators in the combination meter, DTCs, and other data. The ECM sends signals to the TCM concerning engine rpm, opening angles of the throttle valve, temperature of intake air, the temperature of engine coolant, engine torques, and other data. If the TCM cannot communicate with the ECM, the TCM will conclude that there is a malfunction in the CAN system, illuminate the MIL, and set a DTC.

OBDII Code U0101 2014 Toyota RAV4 - Lost Communication with Transmission Control Module - AutoCodes.com — U0101 2014 Toyota RAV4 Code - Lost Communication with Transmission Control Module

What does this mean?

What are the Possible Causes of the DTC U0101 2014 Toyota RAV4?

Faulty Transmission Control Module (TCM)
Transmission Control Module harness is open or shorted
Transmission Control Module circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC U0101 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0101 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0101 2014 Toyota RAV4 code?

Need more information on how to fix the U0101 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0101 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0101 2014 Toyota RAV4 Code

1. What does the OBDII code U0101 for a 2014 Toyota RAV4 mean?

- The code U0101 indicates a "Lost Communication with Transmission Control Module" error.

2. What are the common symptoms of U0101 in a 2014 Toyota RAV4?

- Common symptoms include transmission shifting issues, stalling, or the vehicle going into "limp mode."

3. What are the possible causes of the U0101 code in a 2014 Toyota RAV4?

- The code can be triggered by damaged wiring, faulty connectors, a defective Transmission Control Module (TCM), or a communication network issue.

4. How can I diagnose the U0101 code in a 2014 Toyota RAV4?

- Diagnosis involves checking the TCM for power and ground, inspecting the wiring harness for damage, testing communication signals, and scanning for additional trouble codes.

5. How can I repair the U0101 code in a 2014 Toyota RAV4?

- Repair options include repairing or replacing damaged wiring, fixing faulty connectors, or replacing the Transmission Control Module if necessary.

6. Can I drive my 2014 Toyota RAV4 with the U0101 code?

- It is not recommended to drive the vehicle with the U0101 code present, as it can lead to unsafe driving conditions and potential further damage.

7. How much does it cost to fix the U0101 code in a 2014 Toyota RAV4?

- The cost of fixing the U0101 code can vary depending on the specific cause, but it may range from a few hundred to over a thousand dollars for parts and labor.

8. Will resetting the OBDII code U0101 in a 2014 Toyota RAV4 make it go away permanently?

- Resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to reappear.

9. Can a DIY enthusiast fix the U0101 code in a 2014 Toyota RAV4?

- While some basic troubleshooting steps can be attempted by a DIY enthusiast, diagnosing and repairing the U0101 code may require advanced tools and expertise, so professional assistance is recommended.

10. How long does it take to repair the U0101 code in a 2014 Toyota RAV4?

- The repair time for the U0101 code can vary based on the specific cause and complexity of the issue, but it may take several hours to a full day for a mechanic to diagnose and fix the problem.