AutoCodes – Nissan – U0101 2011 Nissan Versa

U0101 2011 Nissan Versa Code - Lost Communication with Transmission Control Module

Quick Answer

The Controller Area Network (CAN) is a serial communication line for real-time applications. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0101 2011 Nissan Versa indicates Lost Communication with Transmission Control Module .
Common causes: Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,693

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0101 2011 Nissan Versa Description

The Controller Area Network (CAN) is a serial communication line for real-time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads the required data only.
If the Transmission Control Module (TCM) cannot communicate with the Engine Control Module (ECM), the TCM will conclude that there is a malfunction in the CAN system, illuminate the MIL, and set a Diagnostic Trouble Code (DTC).

OBDII Code U0101 2011 Nissan Versa - Lost Communication with Transmission Control Module - AutoCodes.com — U0101 2011 Nissan Versa Code - Lost Communication with Transmission Control Module

What does this mean?

What are the Possible Causes of the DTC U0101 2011 Nissan Versa?

Faulty Transmission Control Module (TCM)
Transmission Control Module harness is open or shorted
Transmission Control Module circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC U0101 2011 Nissan Versa?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0101 2011 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0101 2011 Nissan Versa code?

Need more information on how to fix the U0101 2011 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0101 2011 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0101 2011 Nissan Versa Code

1. What are the common symptoms of OBDII code U0101 in a 2011 Nissan Versa?

- Common symptoms include issues with shifting gears, loss of power, and the transmission getting stuck in one gear.

2. What does the OBDII code U0101 in a 2011 Nissan Versa indicate?

- The code U0101 indicates a communication problem between the engine control module (ECM) and the transmission control module (TCM).

3. What are the possible causes of the U0101 code in a 2011 Nissan Versa?

- Possible causes include a faulty TCM, damaged wiring or connectors, low battery voltage, or a software issue.

4. How can I diagnose the U0101 code in a 2011 Nissan Versa?

- Diagnosing the U0101 code usually involves checking the TCM for proper operation, inspecting wiring and connectors for damage, and ensuring the battery voltage is within specifications.

5. Can I continue driving my 2011 Nissan Versa with the U0101 code?

- It is not recommended to drive the vehicle with the U0101 code present, as it can lead to further transmission issues and potentially unsafe driving conditions.

6. How can the U0101 code in a 2011 Nissan Versa be repaired?

- Repairing the U0101 code typically involves fixing any wiring or connector issues, replacing a faulty TCM if necessary, and ensuring proper communication between the ECM and TCM.

7. Is it possible to clear the U0101 code without fixing the underlying issue?

- Clearing the code without addressing the underlying problem will likely result in the code reappearing once the issue is detected again during vehicle operation.

8. Are there any DIY repair tips for the U0101 code in a 2011 Nissan Versa?

- DIY repair tips may include checking for loose or damaged wiring, ensuring proper battery voltage, and inspecting TCM connectors for corrosion.

9. How much does it cost to repair the U0101 code in a 2011 Nissan Versa?

- The cost of repairing the U0101 code can vary depending on the specific issue, but it may involve replacing a TCM, repairing wiring, or addressing other related problems.

10. Can a mechanic help with diagnosing and repairing the U0101 code in a 2011 Nissan Versa?

- Yes, a qualified mechanic can use diagnostic tools to pinpoint the issue causing the U0101 code and perform the necessary repairs to resolve the problem.