AutoCodes – Nissan – U0101 2010 Nissan Versa

U0101 2010 Nissan Versa Code - Lost Communication with Transmission Control Module

Quick Answer

The Controller Area Network (CAN) is a serial communication line for real-time applications. Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0101 2010 Nissan Versa indicates Lost Communication with Transmission Control Module .
Common causes: Common causes include Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted, Transmission Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,371

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0101 2010 Nissan Versa Description

The Controller Area Network (CAN) is a serial communication line for real-time applications. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads the required data only.
If the Transmission Control Module (TCM) cannot communicate with the Engine Control Module (ECM), the TCM will conclude that there is a malfunction in the CAN system, illuminate the MIL, and set a Diagnostic Trouble Code (DTC).

OBDII Code U0101 2010 Nissan Versa - Lost Communication with Transmission Control Module - AutoCodes.com — U0101 2010 Nissan Versa Code - Lost Communication with Transmission Control Module

What does this mean?

What are the Possible Causes of the DTC U0101 2010 Nissan Versa?

Faulty Transmission Control Module (TCM)
Transmission Control Module harness is open or shorted
Transmission Control Module circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC U0101 2010 Nissan Versa?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0101 2010 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0101 2010 Nissan Versa code?

Need more information on how to fix the U0101 2010 Nissan Versa code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0101 2010 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0101 2010 Nissan Versa Code

1. What does the OBDII code U0101 in a 2010 Nissan Versa mean?

The code U0101 indicates a "Lost Communication with Transmission Control Module" error in the vehicle's onboard diagnostics system.

2. What are the common symptoms of U0101 in a 2010 Nissan Versa?

Common symptoms of U0101 include issues with shifting gears, transmission slipping, and the vehicle going into limp mode.

3. What are the possible causes of U0101 in a 2010 Nissan Versa?

Possible causes of U0101 include faulty wiring connections, a malfunctioning Transmission Control Module (TCM), damaged communication lines, or a blown fuse.

4. How can I diagnose the U0101 code in my 2010 Nissan Versa?

Diagnosing the U0101 code involves checking the TCM for power and ground, inspecting the wiring for any damage, and using a diagnostic tool to communicate with the TCM.

5. Can I still drive my 2010 Nissan Versa with the U0101 code?

It is not recommended to drive your vehicle with the U0101 code as it can lead to further transmission issues and potential safety hazards.

6. How can I repair the U0101 code in my 2010 Nissan Versa?

Repairing the U0101 code may involve fixing any damaged wiring, replacing the TCM if necessary, ensuring all connections are secure, and clearing the code with a diagnostic tool.

7. Is it possible to reset the U0101 code in a 2010 Nissan Versa?

While you can clear the U0101 code using a diagnostic tool, it is essential to address the underlying issue causing the communication problem to prevent the code from reoccurring.

8. Can a DIY enthusiast fix the U0101 code in a 2010 Nissan Versa?

Depending on your skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair the U0101 code, but it is recommended to seek professional help for complex transmission issues.

9. How much does it cost to fix the U0101 code in a 2010 Nissan Versa?

The cost to fix the U0101 code can vary depending on the underlying cause, parts needed for repair, and labor costs. It is advisable to obtain quotes from reputable mechanics or dealerships.

10. Will the U0101 code cause permanent damage to my 2010 Nissan Versa?

If left unresolved, the U0101 code can potentially lead to permanent damage to the transmission system of your 2010 Nissan Versa. It is crucial to address the issue promptly to prevent further damage.