U0028 Acura Code - F-CAN Communication Circuit Error
Quick Answer
The Controller Area Network (CAN) transmits/receives pulsing signals to/from the control modules simultaneously by using two signal lines (CANH and CANL). Common causes include Reprogram Engine Control Module (ECM), Faulty Engine Control Module, Engine Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U0028 Acura indicates F-CAN Communication Circuit Error.
- Common causes
- Common causes include Reprogram Engine Control Module (ECM), Faulty Engine Control Module, Engine Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code U0028 Acura Description
What are the Possible Causes of the DTC U0028 Acura?
- Reprogram Engine Control Module (ECM)
- Faulty Engine Control Module
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC U0028 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the U0028 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the U0028 Acura code?
Need more information on how to fix the U0028 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U0028 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U0028 Acura Code
1. What are the common symptoms of OBDII code U0028 (F-CAN Communication Circuit Error) in an Acura?
The common symptoms include intermittent or total loss of communication with various control modules, malfunction indicator light (MIL) illumination, and various electrical system issues.
2. What are the possible causes of the U0028 OBDII code in an Acura?
The code U0028 typically indicates a fault in the F-CAN (Fast Controller Area Network) communication circuit. Possible causes include damaged wiring, loose connections, faulty control modules, or a defective F-CAN bus.
3. How can I diagnose the U0028 code in my Acura?
To diagnose the U0028 code, a thorough inspection of the F-CAN communication circuit is required. This involves checking the wiring harness, connectors, and control modules for any visible damage or corrosion. Using a diagnostic scanner to retrieve additional fault codes and data can also help pinpoint the issue.
4. Can I drive my Acura with the U0028 code present?
It is not recommended to drive your Acura with the U0028 code present, as it may lead to further electrical system issues or potential safety hazards. It's best to address the underlying problem promptly to prevent any complications.
5. How do I repair the F-CAN communication circuit error in my Acura?
Repairing the F-CAN communication circuit error involves fixing any damaged wiring, securing loose connections, replacing faulty control modules, or repairing/replacing the F-CAN bus as needed. It's advisable to seek assistance from a qualified technician for proper diagnosis and repair.
6. Can a low battery voltage trigger the U0028 OBDII code in an Acura?
Yes, a low battery voltage can potentially trigger the U0028 code due to inadequate power supply affecting the F-CAN communication circuit. Ensuring the battery is in good condition and properly charged is essential for the overall health of the vehicle's electrical system.
7. Will resetting the OBDII code U0028 in my Acura make it go away permanently?
Simply resetting the code may temporarily clear the MIL, but it won't fix the underlying issue causing the U0028 code. It's crucial to diagnose and repair the root cause of the problem to prevent the code from reoccurring.
8. Is the U0028 code specific to certain Acura models?
The U0028 code related to the F-CAN communication circuit error can occur in various Acura models, including but not limited to MDX, RDX, TLX, and ILX. The diagnostic process and repair steps may vary slightly depending on the specific model and year.
9. Can extreme weather conditions contribute to triggering the U0028 code in an Acura?
Extreme weather conditions, such as temperature fluctuations or exposure to moisture, can potentially impact the F-CAN communication circuit and lead to the U0028 code. It's important to keep the vehicle protected and maintained to minimize such risks.
10. How much can I expect to pay for repairing the U0028 code in my Acura?
The cost of repairing the U0028 code in an Acura can vary depending on the extent of the damage, parts needed, labor costs, and dealership or repair shop rates. It's advisable to obtain multiple quotes and consult with a professional for an accurate estimate.
Discuss the causes and fixes for U0028 Acura OBDII Code
Code U0028 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
