AutoCodes – Jeep – U0019 Jeep

U0019 Jeep Code - Low Speed CAN Communication Bus

Quick Answer

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Common causes include Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s), Check for more codes, Faulty Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: U0019 Jeep indicates Low Speed CAN Communication Bus.
Common causes: Common causes include Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s), Check for more codes, Faulty Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,325

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 15, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code U0019 Jeep Description

A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a supervised periodic message that includes the transmitter device availability has not been received.

OBDII Code U0019 Jeep - Low Speed CAN Communication Bus - AutoCodes.com — U0019 Jeep Code - Low Speed CAN Communication Bus

What does this mean?

What are the Possible Causes of the DTC U0019 Jeep?

Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s)
Check for more codes
Faulty Control Module
Control Module harness is open or shorted
Control Module circuit poor electrical connection

How to Fix the DTC U0019 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the U0019 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the U0019 Jeep code?

Need more information on how to fix the U0019 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U0019 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U0019 Jeep Code

1. What are the common symptoms of OBDII code U0019 in a Jeep related to the Low Speed CAN Communication Bus?

- Common symptoms include issues with the vehicle's speedometer, cruise control, and other electronic control modules.

2. What could cause the U0019 code in a Jeep indicating problems with the Low Speed CAN Communication Bus?

- The code may be triggered by a faulty CAN bus module, damaged wiring, loose connections, or a problem with the ECM.

3. How can I diagnose the U0019 code related to the Low Speed CAN Communication Bus in my Jeep?

- Diagnose the code using a professional OBDII scanner to pinpoint the exact location of the issue within the CAN bus system.

4. Is it safe to continue driving my Jeep with the U0019 code related to the Low Speed CAN Communication Bus?

- It is not recommended to drive the vehicle with this code present as it can impact the functionality of critical systems.

5. Can I repair the U0019 code related to the Low Speed CAN Communication Bus in my Jeep myself?

- While minor issues like loose connections can be fixed by an enthusiast, it is best to have a professional diagnose and repair complex CAN bus problems.

6. Are there any common tricks or tips to troubleshoot the U0019 code in a Jeep?

- Check for any visible damage to wiring harnesses, ensure all connections are secure, and reset the code to see if it reoccurs.

7. How much does it typically cost to repair the U0019 code related to the Low Speed CAN Communication Bus in a Jeep?

- The repair cost can vary depending on the underlying cause, but it may range from a few hundred to over a thousand dollars in some cases.

8. Will resetting the U0019 code related to the Low Speed CAN Communication Bus make it go away permanently?

- Resetting the code may temporarily clear it, but if the root cause is not addressed, it is likely to reappear.

9. Can extreme weather conditions affect the occurrence of the U0019 code in a Jeep?

- Yes, extreme temperatures or moisture can impact the CAN bus system and potentially trigger the U0019 code.

10. Is it necessary to visit a dealership for repairs related to the U0019 code in a Jeep?

- While dealerships have specialized knowledge, independent auto repair shops with experience in CAN bus systems can also effectively diagnose and repair the issue.