P0130 SUBARU -

Question

SUBARU INPREZA 2001 1.6L

I Get P0130 ERROR CODE,
and when I go to page 4 of the scan tool there is a line :
O2 Sensor 1, Bank 1 (WR): 7.995 V, Eq ratio :0.999
disconnecting the plag of the O2 sensor did not change the line.
connecting it agein no change.
is the O2 sensor bed?
or the ECM has a problem reading the voltage ?
Tankes

Answer 1

Hi there,

This sounds like the parameters that the sensor should run in. The fact that it didn't change doesn't prove anything. This is because you need to actually be looking at the live data when the car is running. Typically with this code the issue is the sensor itself. Try again with the car running and make sure you are looking at the live data stream.