Question

2006 GMC Canyon Truck won't start for exactly 10 minutes, security system related?
The code that shows up is the P0001 " Fuel volume regulator control circuit open"

Answer 1

If there is a anti theft on  it either due to the no start such as not getting fuel pressure, If its the anti theft do a 20 minute relearn but you would need to have a battery boost to the vehicles battery

30-MINUTE LEARN PROCEDURE

1. Turn ON the ignition, with the engine OFF.
2. Attempt to start the engine, then release the key to ON, vehicle will not start.
3. Observe the SECURITY telltale. After approximately 10 minutes , the telltale will turn OFF.
4. Turn OFF the ignition, and wait 5 seconds .
5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes . The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch transition from OFF to CRANK.
6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password.

IMPORTANT: The vehicle learns the Passlock(TM) Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle.