P1626 CHEVROLET -

Question

p1626 theft detected fuel enable signal not recived tha signal came front bcm

Answer 1

P1626 Anti-theft enabled

For this you can disarm the system,by unlocking and locking the doors using the key fob or the driver door switch,If you belive the alarm is troubling and the vehicle will not be stolen, you can permantly disable the alarm the disadvantage is the security light will stay on,you have a option of remove the security light or let it burn itself out,To do this you will need to have the vehicle in running condition, that mean you need to start it, put the key in the run position and leave it ther for 15 to 20 minutes or until the anti theft light or message is gone, then start the car, you may have to cycle the ignition switch for the fuel pump to prime , you also may need to have a booster battery attached or or another vehicle giving you a jump charge during the 15 to 20 minute wait,Once stared access the ignition switch connection, (you may have to remove the radio to gain acces) there you will see three wires they are yellow , black and white, with the engine running cut the yellow wire, and you are done, test the vehicle,