AutoCodes – Jeep – P3433 Jeep

P3433 Jeep Code - Multiple Displacement System Solenoid 5 Circuit

Quick Answer

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P3433 Jeep indicates Multiple Displacement System Solenoid 5 Circuit.
Common causes: Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,340

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P3433 Jeep Description

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. By actuating the solenoid, oil pressure is raised to the pair of lifter that coincide with each particular solenoid. The oil pressure pushes in the locking pins that allows the lifter to collapse, decoupling the valves and camshafts.

OBDII Code P3433 Jeep - Multiple Displacement System Solenoid 5 Circuit - AutoCodes.com — P3433 Jeep Code - Multiple Displacement System Solenoid 5 Circuit

What does this mean?

What are the Possible Causes of the DTC P3433 Jeep?

Low oil pressure
Restricted oil passage
Engine mechanical condition
Faulty Multiple Displacement System (MDS) Solenoid
Multiple Displacement System (MDS) Solenoid harness is open or shorted
Multiple Displacement System (MDS) Solenoid circuit poor electrical connection

How to Fix the DTC P3433 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Although in some cases changing the engine oil may fix the problem, usually the Multi Displacement System Solenoid may need to replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3433 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3433 Jeep code?

Need more information on how to fix the P3433 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3433 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3433 Jeep Code

1. What does the OBDII code P3433 mean for a Jeep?

Code P3433 indicates a problem with the Multiple Displacement System (MDS) Solenoid 5 Circuit, which is responsible for managing cylinder deactivation to improve fuel efficiency.

2. What are the symptoms of code P3433 on a Jeep?

Symptoms may include reduced fuel efficiency, rough engine idle, hesitation during acceleration, and the check engine light being illuminated.

3. What causes the P3433 code to appear?

Common causes include a faulty MDS solenoid, damaged wiring or connectors in the solenoid circuit, low engine oil pressure, or a malfunctioning Powertrain Control Module (PCM).

4. Can I drive my Jeep with the P3433 code?

While the vehicle may still be drivable, ignoring the issue could lead to reduced performance and potential engine damage. Prompt diagnosis and repair are recommended.

5. How is the P3433 code diagnosed on a Jeep?

Diagnosis involves inspecting the MDS solenoid and its wiring for damage, testing the solenoid for proper operation, checking engine oil pressure, and scanning the PCM for related issues.

6. How do I fix the P3433 code on my Jeep?

Repairs may include replacing the faulty MDS solenoid, repairing or replacing damaged wiring or connectors, ensuring proper oil pressure, or reprogramming or replacing the PCM if necessary.

7. How much does it cost to repair the P3433 code?

Repair costs can vary widely, typically ranging from $150 to $500, depending on whether the issue is with the solenoid, wiring, or PCM.

8. Can low engine oil cause the P3433 code on a Jeep?

Yes, low engine oil or poor oil pressure can affect the MDS solenoidâ€™s performance and trigger the P3433 code.

9. Do I need to replace the MDS solenoid to resolve the P3433 code?

Not always. The issue could also be related to wiring, connectors, or oil pressure problems. A thorough diagnosis is necessary to identify the root cause.

10. What tools are needed to fix the P3433 code on a Jeep?

Tools may include an OBDII scanner, multimeter for testing electrical connections, and basic hand tools for solenoid or wiring replacement.