AutoCodes – Jeep – P3403 Jeep

P3403 Jeep Code - Cylinder 1 Deactivation Control Circuit Low

Quick Answer

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P3403 Jeep indicates Cylinder 1 Deactivation Control Circuit Low.
Common causes
Common causes include Low oil pressure, Restricted oil passage, Engine mechanical condition.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,262
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 05, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P3403 Jeep Description

When all the criteria has been met,power is supplied to each Multi-Displacement System (MDS) Solenoid when engine is making a transition from 8 cylinder mode to 4 cylinder mode. By actuating the solenoid, oil pressure is raised to the pair of lifter that coincide with each particular solenoid. The oil pressure pushes in the locking pins that allows the lifter to collapse, decoupling the valves and camshafts.
OBDII Code P3403 Jeep - Cylinder 1 Deactivation Control Circuit Low - AutoCodes.com
P3403 Jeep Code - Cylinder 1 Deactivation Control Circuit Low

What are the Possible Causes of the DTC P3403 Jeep?

  • Low oil pressure
  • Restricted oil passage
  • Engine mechanical condition
  • Faulty Multiple Displacement System (MDS) Solenoid
  • Multiple Displacement System (MDS) Solenoid harness is open or shorted
  • Multiple Displacement System (MDS) Solenoid circuit poor electrical connection

How to Fix the DTC P3403 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3403 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3403 Jeep code?

Need more information on how to fix the P3403 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3403 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3403 Jeep Code

What does OBDII code P3403 mean for a Jeep?

P3403 indicates a problem with the Cylinder 1 Deactivation Control Circuit, specifically a low signal detected by the engine control module (ECM).

What are the symptoms of code P3403 in a Jeep?

Symptoms may include reduced engine performance, increased fuel consumption, rough idling, and the check engine light turning on.

What causes the P3403 code to appear in a Jeep?

Possible causes include a faulty cylinder deactivation solenoid, damaged wiring or connectors in the control circuit, low oil pressure, or issues with the ECM.

Can driving with code P3403 cause damage to my Jeep?

While it may not cause immediate damage, prolonged driving with this code can lead to increased wear on the engine due to improper cylinder deactivation.

How is the P3403 code diagnosed in a Jeep?

A mechanic will use an OBDII scanner to read the code, inspect the cylinder deactivation solenoid, check for wiring issues, and test the oil pressure.

What repairs are commonly needed for P3403?

Repairs may include replacing the cylinder deactivation solenoid, repairing or replacing damaged wiring, updating the ECM software, or addressing oil pressure issues.

Can low oil pressure cause the P3403 code on a Jeep?

Yes, low oil pressure can prevent proper cylinder deactivation and trigger the P3403 code.

How much does it typically cost to fix code P3403 on a Jeep?

The repair cost depends on the issue but typically ranges from $200 to $600, including diagnostics and replacement parts.

Can I reset the P3403 code without fixing the problem?

You can clear the code temporarily, but it will likely return unless the underlying issue is addressed.

How can I prevent the P3403 code on my Jeep?

Regular maintenance, such as oil changes and inspections of wiring and solenoids, can help prevent issues leading to this code.

Discuss the causes and fixes for P3403 Jeep OBDII Code

Code P3403 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play