AutoCodes – Generic – P3193

P3193 Code - Fuel Run Out

Quick Answer

The Hybrid Vehicle Electronic Control Unit (HV ECU) delivers data to the Engine Control Module (ECM) for such items as power output required for the engine (required output), estimated torque produced by the engine, engine RPM of control target RPM, and whether the engine is in start mode or not. Common causes include Out of fuel, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P3193 indicates Fuel Run Out.
Common causes: Common causes include Out of fuel, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,859

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 13, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P3193 Description

The Hybrid Vehicle Electronic Control Unit (HV ECU) delivers data to the Engine Control Module (ECM) for such items as power output required for the engine (required output), estimated torque produced by the engine, engine RPM of control target RPM, and whether the engine is in start mode or not. Based on required output and target RPM, the ECM calculates a target torque that is to be produced by the engine and compares it with the estimated torque. If estimated torque is very low compared with the target torque or engine start mode continues at engine RPM or for the duration calculated by engine coolant temperature, as the abnormal condition is detected. The Diagnostic Trouble Code (DTC) P3193 is set if the Fuel low-level signal is input into ECM.

OBDII Code P3193 - Fuel Run Out - AutoCodes.com — P3193 Code - Fuel Run Out

What does this mean?

What are the Possible Causes of the DTC P3193?

Out of fuel
Faulty Engine Control Module (ECM)

How to Fix the DTC P3193?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3193 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3193 code?

Need more information on how to fix the P3193 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3193 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P3193 Lexus — Fuel Run Out
P3193 Toyota — Fuel Run Out

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3193 Code

1. What is OBDII code P3193 related to fuel run out?

- OBDII code P3193 indicates that the engine control module has detected that the vehicle has run out of fuel.

2. What are the common symptoms of OBDII code P3193?

- Common symptoms of OBDII code P3193 include the engine stalling, rough idling, and difficulty starting the vehicle.

3. What are the possible causes of OBDII code P3193?

- The most common cause of OBDII code P3193 is running the vehicle out of fuel. Other causes may include a faulty fuel level sensor or a malfunctioning fuel pump.

4. Can OBDII code P3193 be reset without refueling the vehicle?

- OBDII code P3193 will typically not clear or reset until the vehicle is refueled with an adequate amount of fuel.

5. How can I prevent OBDII code P3193 from occurring?

- To prevent OBDII code P3193, it is essential to ensure that the vehicle always has a sufficient amount of fuel. Regularly checking the fuel gauge and refueling in a timely manner can help avoid this issue.

6. Is it safe to drive with OBDII code P3193 triggered?

- It is not recommended to drive the vehicle with OBDII code P3193 triggered, as running out of fuel can cause damage to the fuel system and potentially leave you stranded.

7. Can OBDII code P3193 be repaired without professional help?

- If the cause of OBDII code P3193 is running out of fuel, refueling the vehicle should resolve the issue. However, if the problem persists, it is advisable to seek professional help for further diagnosis and repair.

8. Will OBDII code P3193 cause permanent damage to the vehicle?

- OBDII code P3193 itself does not cause permanent damage to the vehicle, but running out of fuel can lead to issues with the fuel system if not addressed promptly.

9. How long does it take for OBDII code P3193 to clear after refueling?

- OBDII code P3193 should clear shortly after refueling the vehicle with an adequate amount of fuel. In some cases, driving the vehicle for a short distance may also help the code clear.

10. Can a low fuel warning light trigger OBDII code P3193?

- While a low fuel warning light may indicate that the vehicle is running low on fuel, it typically does not trigger OBDII code P3193. The code is usually triggered when the vehicle actually runs out of fuel.