AutoCodes – Audi – P3137 Audi

P3137 Audi Code - Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out

Quick Answer

Manufacturers can use a variable geometry intake manifold to alter airflow into the manifold under certain conditions. Common causes include Faulty Intake Manifold Runner Position Sensor, Intake Manifold Runner Position Sensor harness is open or shorted, Intake Manifold Runner Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P3137 Audi indicates Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out.
Common causes: Common causes include Faulty Intake Manifold Runner Position Sensor, Intake Manifold Runner Position Sensor harness is open or shorted, Intake Manifold Runner Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 21,076

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 03, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P3137 Audi Description

Manufacturers can use a variable geometry intake manifold to alter airflow into the manifold under certain conditions. Under low load conditions, a long thin manifold runner is ideal for flow velocity and swirl/turbulence. Under high load demands, a short think runner is ideal. The rate of intake swirl and turbulence is critical to fuel mixture formation and agitation. A position sensor can be fixed to the control circuit to monitor the valve for both electrical and mechanical faults. An actuator test can be performed to test the circuit and live data or an oscilloscope can be used to validate the position feedback.

OBDII Code P3137 Audi - Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out - AutoCodes.com — P3137 Audi Code - Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out

What does this mean?

What are the Possible Causes of the DTC P3137 Audi?

Faulty Intake Manifold Runner Position Sensor
Intake Manifold Runner Position Sensor harness is open or shorted
Intake Manifold Runner Position Sensor circuit poor electrical connection
Faulty Intake Manifold Runner Control Solenoid Valve

How to Fix the DTC P3137 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is a Factory Service Bulletin for the following Audi models:
2005-2007 Audi A3
2005-2007 Audi A4
2007 Audi A4 Cabriolet
2008 Audi TT
Audi Factory Service Bulletin OBDII Code P3137

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P3137 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P3137 Audi code?

Need more information on how to fix the P3137 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P3137 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P3137 Audi Code

1. What are the common symptoms of OBDII code P3137 in an Audi related to Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out?

The common symptoms include poor engine performance, rough idling, reduced power, and the Check Engine light illuminated on the dashboard.

2. What are the possible causes of OBDII code P3137 in an Audi?

Possible causes may include a faulty intake manifold runner control module, wiring issues, a vacuum leak, or a problem with the intake manifold runner control actuator.

3. How can I diagnose the cause of OBDII code P3137 in my Audi?

A thorough diagnostic process involving checking the intake manifold runner control components, inspecting the wiring for any damage, and using a diagnostic scan tool to retrieve specific fault codes is recommended.

4. What are the repair options for fixing OBDII code P3137 in an Audi?

Repair options may involve replacing a faulty intake manifold runner control module, repairing damaged wiring, addressing vacuum leaks, or replacing the intake manifold runner control actuator.

5. Can I drive my Audi with OBDII code P3137 related to Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out?

It is not recommended to drive the vehicle with this fault code present, as it can lead to further damage and poor engine performance. It is advisable to address the issue promptly.

6. How much does it typically cost to repair OBDII code P3137 in an Audi?

The cost of repair can vary depending on the specific cause of the fault, the labor rates of the repair shop, and the cost of replacement parts. It is best to consult with a professional technician for an accurate estimate.

7. Can I reset the OBDII code P3137 in my Audi on my own?

While you can attempt to clear the fault code using an OBDII scanner, it is important to address the underlying issue causing the fault code to prevent it from reoccurring.

8. Is OBDII code P3137 related to Intake Manifold Runner Control Circuit Bank 1 Basic Settings Not Carried Out a common issue in Audis?

This fault code can occur in Audis with variable intake manifold systems, particularly in models equipped with intake manifold runner control modules.

9. How long does it typically take to repair OBDII code P3137 in an Audi?

The repair time can vary depending on the specific cause of the fault and the complexity of the repair. It may take a few hours to a full day to diagnose and fix the issue.

10. Are there any preventative maintenance tips to avoid OBDII code P3137 in an Audi?

Regularly servicing the intake manifold components, checking for vacuum leaks, and addressing any engine performance issues promptly can help prevent the occurrence of this fault code.