AutoCodes – GMC – P30D5 2016 GMC Sierra

P30D5 2016 GMC Sierra Code - NOx Sensor 3 Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty NOx Sensor 3, NOx Sensor 3 harness is open or shorted, NOx Sensor 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P30D5 2016 GMC Sierra indicates NOx Sensor 3 Signal Message Counter Incorrect.
Common causes
Common causes include Faulty NOx Sensor 3, NOx Sensor 3 harness is open or shorted, NOx Sensor 3 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 157
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 29, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P30D5 2016 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the NOx Sensor 3 Signal Message Counter is Incorrect.
OBDII Code P30D5 2016 GMC Sierra - NOx Sensor 3 Signal Message Counter Incorrect - AutoCodes.com
P30D5 2016 GMC Sierra Code - NOx Sensor 3 Signal Message Counter Incorrect

What are the Possible Causes of the DTC P30D5 2016 GMC Sierra?

  • Faulty NOx Sensor 3
  • NOx Sensor 3 harness is open or shorted
  • NOx Sensor 3 circuit poor electrical connection

How to Fix the DTC P30D5 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P30D5 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P30D5 2016 GMC Sierra code?

Need more information on how to fix the P30D5 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P30D5 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P30D5 2016 GMC Sierra Code

1. What does the OBDII code P30D5 mean on a 2016 GMC Sierra?

P30D5 indicates that the NOx Sensor 3 signal message counter is incorrect, meaning the engine control module (ECM) is not receiving proper communication from the sensor.

2. What are the common symptoms of the P30D5 code?

Symptoms may include a check engine light, reduced fuel efficiency, possible limp mode activation, and increased emissions.

3. What causes the P30D5 code to appear?

Common causes include a faulty NOx Sensor 3, damaged wiring or connectors, a malfunctioning ECM, or software glitches.

4. Can I drive my 2016 GMC Sierra with the P30D5 code?

While the truck may still be drivable, prolonged operation with this code can lead to higher emissions and potential damage to the emissions system.

5. How do I diagnose the P30D5 code?

Diagnosing involves using a scan tool to verify the code, inspecting NOx Sensor 3 and its wiring for damage or corrosion, and checking the ECM for proper data communication.

6. How is the P30D5 code typically fixed?

Repairs may include replacing the NOx Sensor 3, repairing or replacing damaged wiring or connectors, and updating the ECM software if needed.

7. How much does it cost to repair a P30D5 code on a 2016 GMC Sierra?

Costs vary, but replacing a NOx sensor typically ranges from $300 to $800, depending on labor rates and parts pricing.

8. Can a software update resolve the P30D5 code?

In some cases, a software update for the ECM can resolve communication issues causing the code.

9. What happens if the P30D5 code is ignored?

Ignoring the code can lead to higher emissions, poor engine performance, and potential damage to other emissions-related components.

10. Is the NOx Sensor 3 the same as the other NOx sensors on the vehicle?

No, NOx Sensor 3 is specifically located downstream in the exhaust system and monitors different parameters compared to the other NOx sensors.

Discuss the causes and fixes for P30D5 2016 GMC Sierra OBDII Code

Code P30D5 2016 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play