AutoCodes – GMC – P30BD 2015 GMC Sierra

P30BD 2015 GMC Sierra Code - Engine Stall Prevention Active Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P30BD 2015 GMC Sierra indicates Engine Stall Prevention Active Signal Message Counter Incorrect.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module harness is open or shorted, Engine Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 278

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P30BD 2015 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Engine Stall Prevention Active Signal Message Counter is Incorrect.

OBDII Code P30BD 2015 GMC Sierra - Engine Stall Prevention Active Signal Message Counter Incorrect - AutoCodes.com — P30BD 2015 GMC Sierra Code - Engine Stall Prevention Active Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P30BD 2015 GMC Sierra?

Faulty Engine Control Module (ECM)
Engine Control Module harness is open or shorted
Engine Control Module circuit poor electrical connection

How to Fix the DTC P30BD 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P30BD 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P30BD 2015 GMC Sierra code?

Need more information on how to fix the P30BD 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P30BD 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P30BD 2015 GMC Sierra Code

1. What does the OBDII code P30BD mean on a 2015 GMC Sierra?

P30BD indicates that the Engine Control Module (ECM) has detected an issue with the Engine Stall Prevention Active Signal Message Counter, which may be related to communication or signal inconsistencies.

2. What are the common symptoms of code P30BD in a 2015 GMC Sierra?

Symptoms may include engine stalling, rough idling, reduced performance, or the check engine light being illuminated.

3. What causes the P30BD code to trigger on a 2015 GMC Sierra?

Potential causes include faults in the ECM, wiring or connector issues, communication errors between modules, or software glitches.

4. Can the P30BD code cause serious engine problems if ignored?

Yes, ignoring this code can lead to stalling while driving, which can be dangerous, and may also cause further damage to the engine or drivetrain systems over time.

5. How is the P30BD code diagnosed?

A technician will typically use a scan tool to check for related codes, inspect wiring and connectors for damage, and verify proper communication between the ECM and other modules.

6. Can I clear the P30BD code myself?

You can clear the code with an OBDII scanner, but if the underlying issue isnâ€™t resolved, the code will likely return.

7. How can I fix the P30BD code on my 2015 GMC Sierra?

Repairs may include fixing or replacing damaged wiring, updating ECM software, or replacing a faulty ECM if necessary.

8. Is the P30BD code related to the throttle body?

It can be, as communication errors affecting the Engine Stall Prevention feature may involve throttle control systems as part of the issue.

9. How much does it cost to fix the P30BD code on a 2015 GMC Sierra?

Costs can vary but generally range from $100 for minor wiring repairs to $1,000 or more if the ECM needs replacement.

10. Can a weak battery cause the P30BD code in a 2015 GMC Sierra?

Yes, a weak or failing battery can cause communication errors between modules, potentially triggering the P30BD code. Checking the battery is a good first step.