P30BC 2018 GMC Sierra Code - Particulate Matter Sensor Control Module Status Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Particulate Matter Sensor Control Module, Particulate Matter Sensor Control Module harness is open or shorted, Particulate Matter Sensor Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P30BC 2018 GMC Sierra indicates Particulate Matter Sensor Control Module Status Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Particulate Matter Sensor Control Module, Particulate Matter Sensor Control Module harness is open or shorted, Particulate Matter Sensor Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P30BC 2018 GMC Sierra Description
What are the Possible Causes of the DTC P30BC 2018 GMC Sierra?
- Faulty Particulate Matter Sensor Control Module
- Particulate Matter Sensor Control Module harness is open or shorted
- Particulate Matter Sensor Control Module circuit poor electrical connection
How to Fix the DTC P30BC 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P30BC 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P30BC 2018 GMC Sierra code?
Need more information on how to fix the P30BC 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P30BC 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P30BC 2018 GMC Sierra Code
1. What does the OBDII code P30BC mean on a 2018 GMC Sierra?
P30BC indicates an issue with the Particulate Matter Sensor Control Module, specifically that the status signal message counter is incorrect, potentially affecting emissions monitoring.
2. What are the common symptoms of code P30BC on a GMC Sierra?
Symptoms may include the check engine light illuminating, poor fuel efficiency, increased emissions, or the vehicle entering limp mode in severe cases.
3. What causes the P30BC code to appear?
Possible causes include a faulty particulate matter sensor, damaged wiring or connectors, software glitches in the control module, or a malfunctioning ECM.
4. Can I still drive my 2018 GMC Sierra with the P30BC code?
While the truck may still be drivable, ignoring the issue could lead to further damage to the emissions system or reduced engine performance over time.
5. How is the P30BC code diagnosed?
A technician will use a scan tool to confirm the code, inspect the particulate matter sensor and its wiring, and check for updates or faults in the module’s software.
6. How do I fix the P30BC code on my GMC Sierra?
Repairs may involve replacing the particulate matter sensor, repairing damaged wiring, reprogramming the control module, or updating the ECM software.
7. Is the P30BC code covered under warranty for a 2018 GMC Sierra?
If your Sierra is still under the emissions warranty, the repair may be covered. Consult your warranty documentation or dealership for details.
8. What tools are needed to troubleshoot the P30BC code?
A professional-grade OBDII scanner, a multimeter for checking wiring, and access to GMC-specific diagnostic procedures are typically needed.
9. How much does it cost to repair the P30BC code?
The repair cost can vary depending on the exact issue but may range from $200 to $800, depending on whether the sensor, wiring, or module needs replacement.
10. Can a software update resolve the P30BC code?
In some cases, a software update to the ECM or particulate matter sensor module may resolve communication issues causing the code.
Discuss the causes and fixes for P30BC 2018 GMC Sierra OBDII Code
Code P30BC 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
