P30B5 2018 GMC Sierra Code - NOx Sensor 2 Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty NOx Sensor 2, NOx Sensor 2 harness is open or shorted, NOx Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P30B5 2018 GMC Sierra indicates NOx Sensor 2 Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty NOx Sensor 2, NOx Sensor 2 harness is open or shorted, NOx Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P30B5 2018 GMC Sierra Description
What are the Possible Causes of the DTC P30B5 2018 GMC Sierra?
- Faulty NOx Sensor 2
- NOx Sensor 2 harness is open or shorted
- NOx Sensor 2 circuit poor electrical connection
How to Fix the DTC P30B5 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P30B5 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P30B5 2018 GMC Sierra code?
Need more information on how to fix the P30B5 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P30B5 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P30B5 2018 GMC Sierra Code
1. What does the OBDII code P30B5 mean on a 2018 GMC Sierra?
P30B5 indicates that the NOx Sensor 2 is reporting an incorrect signal message counter, suggesting an issue with the sensor's communication or functionality.
2. What are the symptoms of code P30B5 on a GMC Sierra?
Symptoms may include a Check Engine Light, reduced fuel efficiency, increased emissions, or the vehicle entering limp mode.
3. What causes the P30B5 code to appear on a 2018 GMC Sierra?
Common causes include a faulty NOx Sensor 2, wiring or connector issues, a malfunctioning SCR system, or software glitches in the engine control module (ECM).
4. Can a bad NOx sensor cause performance issues in my GMC Sierra?
Yes, a malfunctioning NOx sensor can lead to poor engine performance, increased emissions, or the vehicle entering reduced power mode.
5. How do I diagnose code P30B5 on my 2018 GMC Sierra?
Use a diagnostic scanner to confirm the code, then inspect the NOx Sensor 2 and its wiring for damage, corrosion, or loose connections. A multimeter may help verify the sensor's functionality.
6. Is it safe to drive with a P30B5 code on my GMC Sierra?
Driving with this code is not recommended as it may lead to increased emissions, reduced fuel economy, or further damage to the emissions system.
7. How do I fix the P30B5 code on a 2018 GMC Sierra?
Repairs may involve replacing the NOx Sensor 2, repairing damaged wiring, updating the ECM software, or addressing issues with the SCR system.
8. What is the role of NOx Sensor 2 in a GMC Sierra?
NOx Sensor 2 monitors nitrogen oxide levels downstream of the SCR system to ensure proper emissions control and compliance with environmental regulations.
9. How much does it cost to repair a P30B5 code on a GMC Sierra?
Repair costs can vary, but replacing a NOx sensor typically ranges from $300 to $800, including parts and labor.
10. Can a software update clear the P30B5 code on my GMC Sierra?
In some cases, a software update for the ECM can resolve communication errors and clear the code if the sensor and wiring are functioning properly.
Discuss the causes and fixes for P30B5 2018 GMC Sierra OBDII Code
Code P30B5 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
