AutoCodes – Chevrolet – P30B4 2016 Chevrolet Silverado

P30B4 2016 Chevrolet Silverado Code - NOx Sensor 1 Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P30B4 2016 Chevrolet Silverado indicates NOx Sensor 1 Signal Message Counter Incorrect.
Common causes: Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 260

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P30B4 2016 Chevrolet Silverado Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the NOx Sensor 1 Signal Message Counter is Incorrect.

OBDII Code P30B4 2016 Chevrolet Silverado - NOx Sensor 1 Signal Message Counter Incorrect - AutoCodes.com — P30B4 2016 Chevrolet Silverado Code - NOx Sensor 1 Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P30B4 2016 Chevrolet Silverado?

Faulty NOx Sensor 1
NOx Sensor 1 harness is open or shorted
NOx Sensor 1 circuit poor electrical connection

How to Fix the DTC P30B4 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P30B4 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P30B4 2016 Chevrolet Silverado code?

Need more information on how to fix the P30B4 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P30B4 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P30B4 2016 Chevrolet Silverado Code

1. What does the OBDII code P30B4 mean on a 2016 Chevrolet Silverado?

P30B4 indicates that the NOx Sensor 1 signal message counter is incorrect, suggesting an issue with the data communication or functionality of the NOx sensor.

2. What are the common symptoms of the P30B4 code?

Symptoms may include a check engine light, reduced engine performance, increased emissions, and possible fuel efficiency issues.

3. What causes the P30B4 code to appear?

Potential causes include a faulty NOx sensor, wiring or connector issues, software glitches in the engine control module (ECM), or improper sensor calibration.

4. How can I diagnose the P30B4 code?

Start by scanning the vehicle with an OBDII tool, inspecting the NOx sensor wiring and connectors for damage, and verifying sensor signal integrity with a multimeter or diagnostic scanner.

5. Can I drive my Silverado with the P30B4 code active?

Driving with this code is not recommended, as it may lead to higher emissions and reduced engine performance. Addressing the issue promptly is advisable.

6. How do I fix the P30B4 code on my 2016 Chevrolet Silverado?

Common fixes include replacing the NOx sensor, repairing damaged wiring or connectors, and updating the ECM software if applicable.

7. How much does it cost to repair a P30B4 code?

Repairs can range from $200 to $600, depending on whether the issue is a sensor replacement or a more complex wiring or ECM problem.

8. Can a failed NOx sensor cause long-term damage?

A failed NOx sensor can lead to increased emissions and strain on the exhaust aftertreatment system, potentially causing long-term damage if not repaired.

9. How do I prevent the P30B4 code from recurring?

Regular maintenance, including checking and cleaning sensor connections, monitoring software updates, and ensuring proper fuel quality, can help prevent this issue.

10. Is the P30B4 code specific to Chevrolet Silverado trucks?

No, the P30B4 code can appear on other vehicles with similar NOx sensor systems, but the troubleshooting steps may differ depending on the model.