P30B4 2014 GMC Sierra Code - NOx Sensor 1 Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P30B4 2014 GMC Sierra indicates NOx Sensor 1 Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P30B4 2014 GMC Sierra Description
What are the Possible Causes of the DTC P30B4 2014 GMC Sierra?
- Faulty NOx Sensor 1
- NOx Sensor 1 harness is open or shorted
- NOx Sensor 1 circuit poor electrical connection
How to Fix the DTC P30B4 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P30B4 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P30B4 2014 GMC Sierra code?
Need more information on how to fix the P30B4 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P30B4 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P30B4 2014 GMC Sierra Code
1. What does the OBDII code P30B4 mean on a 2014 GMC Sierra?
P30B4 indicates that the NOx Sensor 1 has detected an incorrect signal message counter, which may affect how the vehicle monitors nitrogen oxide levels in the exhaust.
2. What are the symptoms of a P30B4 code in a 2014 GMC Sierra?
Common symptoms include the check engine light turning on, reduced fuel efficiency, potential limp mode activation, and increased emissions.
3. What causes the P30B4 code to appear?
The P30B4 code is typically caused by a faulty NOx Sensor 1, wiring or connector issues, software glitches in the engine control module (ECM), or corrosion in the sensor harness.
4. Can I continue driving with the P30B4 code on my GMC Sierra?
While the vehicle may still be drivable, prolonged operation with this code could result in reduced fuel efficiency and increased emissions. Prompt diagnosis and repair are recommended.
5. How can I diagnose the P30B4 code on my 2014 GMC Sierra?
Diagnosis involves using a scan tool to confirm the code, inspecting sensor wiring for damage, checking for loose connections, and testing the NOx sensor's functionality.
6. How do I fix the P30B4 code on my GMC Sierra?
Repairs may include replacing the NOx Sensor 1, repairing or replacing damaged wiring or connectors, and updating the ECM software if necessary.
7. How much does it cost to fix a P30B4 code?
Replacing a NOx sensor typically costs between $300 and $700, depending on parts and labor. Additional costs may apply for wiring repairs or ECM reprogramming.
8. Can a dirty exhaust system cause the P30B4 code?
A dirty exhaust system isn’t a direct cause, but excessive soot buildup can hinder the NOx sensor's ability to function properly, potentially contributing to the problem.
9. Do I need to reset the code after repairs?
Yes, after completing repairs, use an OBDII scan tool to clear the code and verify that it does not return during a test drive.
10. How can I prevent the P30B4 code from occurring again?
Regular maintenance, including timely replacement of sensors and keeping the exhaust system clean, can help prevent this code from reappearing.
Discuss the causes and fixes for P30B4 2014 GMC Sierra OBDII Code
Code P30B4 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
