AutoCodes – Chevrolet – P30B4 2014 Chevrolet Silverado

P30B4 2014 Chevrolet Silverado Code - NOx Sensor 1 Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P30B4 2014 Chevrolet Silverado indicates NOx Sensor 1 Signal Message Counter Incorrect.
Common causes: Common causes include Faulty NOx Sensor 1, NOx Sensor 1 harness is open or shorted, NOx Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 211

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P30B4 2014 Chevrolet Silverado Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the NOx Sensor 1 Signal Message Counter is Incorrect.

OBDII Code P30B4 2014 Chevrolet Silverado - NOx Sensor 1 Signal Message Counter Incorrect - AutoCodes.com — P30B4 2014 Chevrolet Silverado Code - NOx Sensor 1 Signal Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P30B4 2014 Chevrolet Silverado?

Faulty NOx Sensor 1
NOx Sensor 1 harness is open or shorted
NOx Sensor 1 circuit poor electrical connection

How to Fix the DTC P30B4 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P30B4 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P30B4 2014 Chevrolet Silverado code?

Need more information on how to fix the P30B4 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P30B4 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P30B4 2014 Chevrolet Silverado Code

1. What does the OBDII code P30B4 mean on a 2014 Chevrolet Silverado?

P30B4 indicates that the NOx (Nitrogen Oxide) Sensor 1 has an incorrect signal message counter, meaning the sensor is not sending proper data to the engine control module (ECM).

2. What are the symptoms of code P30B4 in a 2014 Chevrolet Silverado?

Common symptoms include a check engine light, reduced fuel efficiency, possible limp mode activation, and increased emissions.

3. What causes the P30B4 code to appear?

The code is typically caused by a faulty NOx sensor 1, damaged wiring or connections to the sensor, or a software issue within the ECM.

4. Can I drive my 2014 Chevrolet Silverado with the P30B4 code active?

While the vehicle may still operate, driving with this code for extended periods can lead to reduced performance, higher emissions, and potential damage to other components.

5. How do I fix the P30B4 code in my Silverado?

Inspect the wiring and connectors for damage, clean any corrosion, and replace the NOx sensor 1 if necessary. A software update or reprogramming of the ECM may also be required.

6. How much does it cost to repair a P30B4 code on a 2014 Silverado?

The cost to replace a NOx sensor typically ranges from $300 to $500, including parts and labor. Diagnosing and repairing wiring issues or ECM updates may vary.

7. Where is NOx Sensor 1 located on a 2014 Chevrolet Silverado?

NOx Sensor 1 is usually located upstream in the exhaust system, near the catalytic converter.

8. Can a P30B4 code damage my engine if left untreated?

While it may not directly damage the engine, unresolved emissions issues can lead to further complications, such as clogged exhaust components or reduced engine efficiency.

9. Do I need special tools to diagnose or repair the P30B4 code?

Yes, diagnosing this code typically requires an OBDII scanner and possibly a multimeter to check wiring continuity. Some repairs may also require specialized tools to remove and replace the NOx sensor.

10. Can a software update fix the P30B4 code on my Silverado?

In some cases, a software update for the ECM can resolve communication issues with the NOx sensor, but a proper diagnosis is needed to confirm if this is the solution.