P2C0A Code - Intake Camshaft Profile Actuator Position Sensor 2 Performance
Quick Answer
The Intake Camshaft Profile Actuator Position Sensor is integrated into the intake camshaft profile actuator assembly and is used by the Engine Control Module (ECM) to monitor the position of the actuator pins that control the camshaft profile sleeve. Common causes include Faulty Intake Camshaft Profile Actuator, Intake Camshaft Profile Actuator harness is open or shorted, Intake Camshaft Profile Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2C0A indicates Intake Camshaft Profile Actuator Position Sensor 2 Performance.
- Common causes
- Common causes include Faulty Intake Camshaft Profile Actuator, Intake Camshaft Profile Actuator harness is open or shorted, Intake Camshaft Profile Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2C0A Description
Failures can occur due to an internal sensor fault, a damaged actuator assembly, wiring problems, poor electrical connections, or issues in the 5-volt reference, signal, or ground circuits. The ECM continuously compares the sensor feedback to the commanded actuator position. If the sensor signal is out of range, stuck, erratic, or does not correspond to the commanded position, diagnostic trouble codes may be stored. In some cases, contamination, mechanical wear, or a sticking actuator pin can prevent proper movement and cause the sensor readings to become inaccurate.
What are the Possible Causes of the DTC P2C0A?
- Faulty Intake Camshaft Profile Actuator
- Intake Camshaft Profile Actuator harness is open or shorted
- Intake Camshaft Profile Actuator circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2C0A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2C0A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2C0A code?
Need more information on how to fix the P2C0A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2C0A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2C0A Chevrolet — Intake Camshaft Profile Actuator Position Sensor 2 Performance
- P2C0A GMC — Intake Camshaft Profile Actuator Position Sensor 2 Performance
Frequently Asked Questions about P2C0A Code
No Frequently Asked Questions about P2C0A Code found.
Discuss the causes and fixes for P2C0A OBDII Code
Code P2C0A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
