AutoCodes – Ford – P2BA7 Ford

P2BA7 Ford Code - NOx Exceedence - Empty Reagent Tank

Quick Answer

The selective catalytic reduction system reduces oxides of nitrogen (NOx) emissions by injecting a metered amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the diesel particulate filter (DPF). Common causes include Faulty NOx Sensors, NOx Sensors harness is open or shorted, NOx Sensors circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2BA7 Ford indicates NOx Exceedence - Empty Reagent Tank.
Common causes: Common causes include Faulty NOx Sensors, NOx Sensors harness is open or shorted, NOx Sensors circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,667

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2BA7 Ford Description

The selective catalytic reduction system reduces oxides of nitrogen (NOx) emissions by injecting a metered amount of diesel exhaust fluid or reductant into the exhaust gas stream entering the diesel particulate filter (DPF). Within the selective catalytic reduction catalyst, the reductant reacts with the NOx to form nitrogen, carbon dioxide, and water vapor. Upstream and downstream NOx sensors provide the Engine Control Module (ECM) with engine-out and tailpipe-out NOx levels.
The ECM uses the 2 NOx sensors to control exhaust NOx levels. The NOx sensor measures the amount of NOx and oxygen in the exhaust system. The first NOx sensor is located at the outlet of the turbocharger and monitors the engine out NOx. The second NOx sensor is located in the DPF that monitors NOx levels exiting the DPF. The ECM varies the amount of reductant added by varying the reductant injector duty cycle in response to changes in engine exhaust out NOx levels.

OBDII Code P2BA7 Ford - NOx Exceedence - Empty Reagent Tank - AutoCodes.com — P2BA7 Ford Code - NOx Exceedence - Empty Reagent Tank

What does this mean?

What are the Possible Causes of the DTC P2BA7 Ford?

Faulty NOx Sensors
NOx Sensors harness is open or shorted
NOx Sensors circuit poor electrical connection
Fualty Diesel Particulate Filter (DPF)

How to Fix the DTC P2BA7 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2BA7 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2BA7 Ford code?

Need more information on how to fix the P2BA7 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2BA7 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.