AutoCodesDodge – P2A04 Dodge

P2A04 Dodge Code - O2 Sensor Circuit Range/Performance Bank 2 Sensor 2

Quick Answer

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2A04 Dodge indicates O2 Sensor Circuit Range/Performance Bank 2 Sensor 2.
Common causes
Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,948
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 17, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2A04 Dodge Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
OBDII Code P2A04 Dodge - O2 Sensor Circuit Range/Performance Bank 2 Sensor 2 - AutoCodes.com
P2A04 Dodge Code - O2 Sensor Circuit Range/Performance Bank 2 Sensor 2

What are the Possible Causes of the DTC P2A04 Dodge?

  • Faulty Rear Heated Oxygen Sensor Bank 2
  • Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks may be faulty
  • Exhaust gas leaks

How to Fix the DTC P2A04 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2A04 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2A04 Dodge code?

Need more information on how to fix the P2A04 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2A04 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2A04 Dodge Code

1. What does the OBDII code P2A04 mean on a Dodge vehicle?

P2A04 indicates an issue with the O2 sensor circuit for Bank 2, Sensor 2, where the sensor's performance is outside the expected range.

2. What are the symptoms of a P2A04 code in a Dodge?

Symptoms may include a check engine light, decreased fuel efficiency, rough idling, or higher emissions.

3. What causes the P2A04 code on a Dodge?

Common causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or an issue with the engine control module (ECM).

4. How do I locate Bank 2, Sensor 2 on my Dodge?

Bank 2 refers to the side of the engine opposite Bank 1 (cylinder 1), and Sensor 2 is located downstream, after the catalytic converter.

5. Can I drive my Dodge with a P2A04 code?

Driving with a P2A04 code is possible but not recommended, as it can lead to reduced performance, increased emissions, and potential damage to other components.

6. How is the P2A04 code diagnosed in a Dodge?

Diagnosis involves checking the O2 sensor's voltage readings, inspecting wiring and connectors, and testing for exhaust leaks or ECM issues.

7. How do I fix the P2A04 code on my Dodge?

Repairs may include replacing the O2 sensor, repairing damaged wiring, fixing exhaust leaks, or reprogramming the ECM if needed.

8. How much does it cost to fix a P2A04 code on a Dodge?

The cost varies but typically runs between $100 and $300 for an O2 sensor replacement, plus diagnostic fees if performed by a mechanic.

9. Can a dirty or clogged catalytic converter cause a P2A04 code?

Yes, a clogged catalytic converter can disrupt exhaust flow and affect the downstream O2 sensor’s readings, triggering the code.

10. Will clearing the P2A04 code fix the problem on my Dodge?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P2A04 Dodge OBDII Code

Code P2A04 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play