P2A03 Infiniti Code - Air Fuel Ratio Sensor Circuit Range/Performance Bank 2 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted, Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2A03 Infiniti indicates Air Fuel Ratio Sensor Circuit Range/Performance Bank 2 Sensor 1.
- Common causes
- Common causes include Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted, Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2A03 Infiniti Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P2A03 Infiniti?
- Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1
- Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted
- Air Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection
- Fuel pressure
- Fuel injector
- Intake air leaks
How to Fix the DTC P2A03 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2A03 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2A03 Infiniti code?
Need more information on how to fix the P2A03 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2A03 Infiniti code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2A03 Infiniti Code
No Frequently Asked Questions about P2A03 Infiniti Code found.
Discuss the causes and fixes for P2A03 Infiniti OBDII Code
Code P2A03 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.