P2A03 Honda Code - O2 Sensor Circuit Range/Performance Bank 2 Sensor 1
Quick Answer
The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. Common causes include Air fuel ratio (A/F) sensor 1, Air fuel ratio (A/F) sensor 1 heater, Fuel pressure. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2A03 Honda indicates O2 Sensor Circuit Range/Performance Bank 2 Sensor 1.
- Common causes
- Common causes include Air fuel ratio (A/F) sensor 1, Air fuel ratio (A/F) sensor 1 heater, Fuel pressure.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2A03 Honda Description
layer, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement Lambda = 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide Lambda range.
The exhaust gas components diffuse through the diffusion layer at the sensor cell. An electrode layer is applied voltage, and this current relative oxygen density in lean. Also this current relative hydrocarbon density in rich.
Therefore, the A/F sensor 1 is able to indicate air fuel ratio by this electrode layer of current. In addition, a heater is integrated in the
sensor to ensure the required operating temperature of about 800°C (1,472°F).
What are the Possible Causes of the DTC P2A03 Honda?
- Air fuel ratio (A/F) sensor 1
- Air fuel ratio (A/F) sensor 1 heater
- Fuel pressure
- Fuel injector
- Intake air leaks
How to Fix the DTC P2A03 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2A03 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2A03 Honda code?
Need more information on how to fix the P2A03 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2A03 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2A03 Honda Code
No Frequently Asked Questions about P2A03 Honda Code found.
Discuss the causes and fixes for P2A03 Honda OBDII Code
Code P2A03 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.