AutoCodes – GMC – P2826 2016 GMC Sierra

P2826 2016 GMC Sierra Code - Transmission Control Solenoid Valve 9 Control Circuit Low Voltage

Quick Answer

The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2826 2016 GMC Sierra indicates Transmission Control Solenoid Valve 9 Control Circuit Low Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 196

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2826 2016 GMC Sierra Description

The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the Transmission Control Solenoid Valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM). The Diagnostic Trouble Code (DTC) is set when the Transmission Control Solenoid Valve Control Circuit commanded state does not match the actual state for greater than 1 s.

OBDII Code P2826 2016 GMC Sierra - Transmission Control Solenoid Valve 9 Control Circuit Low Voltage - AutoCodes.com — P2826 2016 GMC Sierra Code - Transmission Control Solenoid Valve 9 Control Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2826 2016 GMC Sierra?

Low transmission fluid level
Dirty transmission fluid
Faulty Transmission Control Solenoid Valve
Transmission Control Solenoid Valve harness is open or shorted
Transmission Control Solenoid Valve circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC P2826 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2826 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2826 2016 GMC Sierra code?

Need more information on how to fix the P2826 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2826 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2826 2016 GMC Sierra Code

1. What does the OBDII code P2826 mean on a 2016 GMC Sierra?

The code P2826 indicates a problem in the Transmission Control Solenoid Valve 9 Control Circuit, specifically a low voltage issue.

2. What are the symptoms of code P2826 in a 2016 GMC Sierra?

Symptoms may include harsh or delayed shifting, transmission slipping, poor fuel efficiency, or the transmission being stuck in a single gear.

3. What causes the P2826 code in a GMC Sierra?

Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, low transmission fluid, or a defective transmission control module (TCM).

4. How can I diagnose the P2826 code on my 2016 GMC Sierra?

Start by checking the transmission fluid level and quality, inspect the wiring and connectors for damage or corrosion, and test the solenoid and related circuits using a multimeter.

5. Can I drive my 2016 GMC Sierra with the P2826 code?

Driving with this code is not recommended as it can cause further damage to the transmission and result in unsafe driving conditions.

6. How do I fix the P2826 code on my GMC Sierra?

Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring or connectors, or updating or reprogramming the TCM if necessary.

7. How much does it cost to repair the P2826 code in a 2016 GMC Sierra?

Repair costs can range from $150 to $400 for solenoid replacement, while wiring or TCM repairs may vary depending on labor and parts.

8. Can a low transmission fluid level cause the P2826 code?

Yes, low or contaminated transmission fluid can lead to improper solenoid operation, triggering the P2826 code.

9. Will clearing the P2826 code with a scanner fix the issue?

Clearing the code may temporarily remove the check engine light, but the underlying issue must be fixed to prevent the code from returning.

10. How often does the P2826 code occur in GMC Sierras?

This code is relatively uncommon but can occur due to wear and tear, especially in high-mileage vehicles or if regular maintenance has been neglected.