P2826 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 9 Control Circuit Low Voltage
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2826 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 9 Control Circuit Low Voltage.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2826 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P2826 2014 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2826 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2826 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2826 2014 Chevrolet Silverado code?
Need more information on how to fix the P2826 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2826 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2826 2014 Chevrolet Silverado Code
1. What does the OBDII code P2826 mean on a 2014 Chevrolet Silverado?
P2826 indicates an issue with the Transmission Control Solenoid Valve 9 Control Circuit, specifically a low voltage condition.
2. What are the common symptoms of the P2826 code in a 2014 Chevrolet Silverado?
Symptoms may include harsh or delayed shifting, transmission slipping, poor fuel efficiency, or the Check Engine Light being illuminated.
3. What causes the P2826 code to appear on my Silverado?
Common causes include a faulty transmission control solenoid, damaged or corroded wiring, a failing transmission control module (TCM), or low transmission fluid.
4. Can I drive my 2014 Chevrolet Silverado with the P2826 code?
Driving with this code is not recommended as it may cause further damage to the transmission and lead to unsafe driving conditions.
5. How can I diagnose the P2826 code on my Silverado?
Start by checking the transmission fluid level and condition, inspect the wiring and connectors for damage, and test the solenoid and control circuit with a multimeter.
6. What repairs are needed to fix the P2826 code?
Repairs may include replacing the faulty solenoid, repairing or replacing damaged wiring, updating or reprogramming the TCM, or addressing low or contaminated transmission fluid.
7. How much does it cost to fix the P2826 code on a 2014 Chevrolet Silverado?
Repair costs vary depending on the issue, ranging from $100 for wiring repairs to over $500 for solenoid replacement or TCM reprogramming.
8. Can low transmission fluid cause the P2826 code to appear?
Yes, low or contaminated transmission fluid can cause solenoid issues and trigger the P2826 code.
9. Is a faulty TCM a common cause of the P2826 code?
While less common, a malfunctioning Transmission Control Module (TCM) can cause the P2826 code if it fails to properly control the solenoid.
10. Will clearing the P2826 code resolve the issue permanently?
Clearing the code with a scan tool will only reset it temporarily; the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P2826 2014 Chevrolet Silverado OBDII Code
Code P2826 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
