P2825 2015 GMC Sierra Code - Transmission Control Solenoid Valve 9 Performance
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2825 2015 GMC Sierra indicates Transmission Control Solenoid Valve 9 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2825 2015 GMC Sierra Description
What are the Possible Causes of the DTC P2825 2015 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2825 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2825 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2825 2015 GMC Sierra code?
Need more information on how to fix the P2825 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2825 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2825 2015 GMC Sierra Code
1. What does OBDII code P2825 mean on a 2015 GMC Sierra?
P2825 indicates an issue with the Transmission Control Solenoid Valve 9's performance, which is responsible for regulating hydraulic pressure in the transmission.
2. What are the common symptoms of code P2825 in a 2015 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, poor fuel economy, or the transmission being stuck in a single gear.
3. What causes the P2825 code to appear on a 2015 GMC Sierra?
Common causes include a faulty solenoid valve, low or dirty transmission fluid, wiring issues, or a malfunctioning transmission control module (TCM).
4. Can low transmission fluid cause the P2825 code?
Yes, low or contaminated transmission fluid can lead to improper solenoid operation and trigger the P2825 code.
5. How do I diagnose the P2825 code on my GMC Sierra?
Start by checking the transmission fluid level and condition. Then inspect the solenoid wiring and connectors for damage, and use a diagnostic scanner to monitor solenoid operation.
6. Is it safe to drive with the P2825 code on a 2015 GMC Sierra?
Driving with this code is not recommended, as it may cause further damage to the transmission and result in unsafe driving conditions.
7. How much does it cost to fix the P2825 code on a 2015 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the solenoid or related components need replacement.
8. Can I fix the P2825 code myself?
If you have mechanical experience, you can check the fluid, wiring, and solenoid. However, if the solenoid needs replacement, it may require professional tools and expertise.
9. Do I need to replace the transmission for the P2825 code?
Not necessarily. The issue is often localized to the solenoid or related wiring, and replacing the transmission is typically not required.
10. Will clearing the P2825 code solve the problem?
Clearing the code may temporarily remove the check engine light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2825 2015 GMC Sierra OBDII Code
Code P2825 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
