P2825 2014 GMC Sierra Code - Transmission Control Solenoid Valve 9 Performance
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2825 2014 GMC Sierra indicates Transmission Control Solenoid Valve 9 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2825 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2825 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2825 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2825 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2825 2014 GMC Sierra code?
Need more information on how to fix the P2825 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2825 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2825 2014 GMC Sierra Code
1. What does the OBDII code P2825 mean on a 2014 GMC Sierra?
P2825 indicates an issue with the performance or operation of transmission control solenoid valve 9, which helps regulate hydraulic pressure in the transmission.
2. What are the common symptoms of P2825 in a 2014 GMC Sierra?
Symptoms may include rough shifting, slipping gears, delayed engagement, reduced fuel efficiency, and possibly the transmission going into limp mode.
3. What causes the P2825 code to appear?
Possible causes include a faulty transmission control solenoid, wiring or connector issues, low or dirty transmission fluid, or internal transmission problems.
4. Can low transmission fluid trigger the P2825 code?
Yes, low or contaminated transmission fluid can cause solenoid performance issues and may trigger the P2825 code.
5. How do you diagnose the P2825 code?
Diagnosis involves checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the resistance and operation of the affected solenoid.
6. Is it safe to drive with the P2825 code?
Driving with the P2825 code is not recommended, as it may lead to further transmission damage or leave the vehicle stuck in limp mode.
7. How much does it cost to fix the P2825 code?
Repair costs vary but may range from $150 to $400 for a solenoid replacement, depending on labor rates and parts. More extensive transmission repairs can cost significantly more.
8. Can I fix the P2825 code myself?
If you're experienced with automotive repairs, you can check the transmission fluid and inspect wiring. However, solenoid replacement or internal transmission repairs may require professional expertise.
9. Will resetting the check engine light clear the P2825 code permanently?
Resetting the light may clear the code temporarily, but the underlying issue must be resolved to prevent it from returning.
10. How can I prevent the P2825 code from occurring?
Regular transmission maintenance, including fluid changes and inspections, can help prevent issues with solenoids and other transmission components.
Discuss the causes and fixes for P2825 2014 GMC Sierra OBDII Code
Code P2825 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
