P2818 2014 GMC Sierra Code - Transmission Control Solenoid Valve 8 Stuck On
Quick Answer
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2818 2014 GMC Sierra indicates Transmission Control Solenoid Valve 8 Stuck On.
- Common causes
- Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2818 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2818 2014 GMC Sierra?
- Faulty Transfer Case Shift Control Switch
- Transfer Case Shift Control Switch harness is open or shorted
- Transfer Case Shift Control Switch circuit poor electrical connection
How to Fix the DTC P2818 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2818 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2818 2014 GMC Sierra code?
Need more information on how to fix the P2818 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2818 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2818 2014 GMC Sierra Code
What does the OBDII code P2818 mean on a 2014 GMC Sierra?
The P2818 code indicates that the transmission control module has detected that solenoid valve 8 is stuck in the "on" position, which can affect gear shifting and transmission performance.
What are the common symptoms of the P2818 code?
Symptoms include erratic or harsh shifting, transmission slipping, trouble engaging gears, decreased fuel efficiency, and the illumination of the check engine light.
What causes the P2818 code to appear?
Common causes include a faulty transmission control solenoid, clogged transmission fluid passages, low or dirty transmission fluid, damaged wiring, or a malfunctioning transmission control module (TCM).
Can I drive my 2014 GMC Sierra with the P2818 code?
Driving with this code can cause further damage to the transmission, especially if shifting issues or slipping occur. It’s best to address the problem as soon as possible.
How is the P2818 code diagnosed?
A technician will use a scan tool to confirm the code, inspect the transmission fluid condition, check the wiring and connections to the solenoid, and test the solenoid for proper operation.
How can I fix the P2818 code on my GMC Sierra?
Repairs may include replacing the faulty solenoid, cleaning or flushing the transmission fluid, repairing damaged wiring or connectors, or reprogramming or replacing the TCM if necessary.
What does the transmission control solenoid do?
The transmission control solenoid regulates the flow of transmission fluid to control gear shifting within the transmission system.
How much does it cost to fix the P2818 code?
Repair costs vary depending on the issue, but replacing a transmission solenoid typically costs between $150 and $400, while more extensive transmission repairs can be significantly higher.
Can low transmission fluid cause the P2818 code?
Yes, low or dirty transmission fluid can lead to poor solenoid operation, contributing to the P2818 code.
How can I prevent the P2818 code from occurring?
Regularly check and maintain your transmission fluid, address shifting issues promptly, and ensure proper maintenance of the transmission system.
Discuss the causes and fixes for P2818 2014 GMC Sierra OBDII Code
Code P2818 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
