P2815 2015 GMC Sierra Code - Transmission Control Solenoid Valve 7 Control Circuit High Voltage
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2815 2015 GMC Sierra indicates Transmission Control Solenoid Valve 7 Control Circuit High Voltage.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2815 2015 GMC Sierra Description
What are the Possible Causes of the DTC P2815 2015 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2815 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2815 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2815 2015 GMC Sierra code?
Need more information on how to fix the P2815 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2815 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2815 2015 GMC Sierra Code
1. What does the OBDII code P2815 mean on a 2015 GMC Sierra?
P2815 indicates a high voltage condition in the control circuit of Transmission Control Solenoid Valve 7, which is responsible for gear shifting in the transmission system.
2. What are the common symptoms of the P2815 code on a 2015 GMC Sierra?
Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, or the vehicle entering limp mode. The check engine light will also be illuminated.
3. What causes the P2815 code on a 2015 GMC Sierra?
Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, a malfunctioning transmission control module (TCM), or electrical shorts.
4. How can I diagnose the P2815 code on my 2015 GMC Sierra?
Start by scanning the vehicle with an OBDII scanner, inspect the wiring and connectors for damage or corrosion, test the solenoid for proper operation, and check the voltage readings in the circuit.
5. Can I drive my 2015 GMC Sierra with the P2815 code?
Driving with the P2815 code is not recommended as it can lead to further transmission damage, reduced performance, or the vehicle being stuck in an undesirable gear.
6. How do I fix the P2815 code on a 2015 GMC Sierra?
Repairs may involve replacing the faulty transmission control solenoid, repairing damaged wiring or connectors, or reprogramming or replacing the transmission control module (TCM).
7. How much does it cost to fix the P2815 code on a 2015 GMC Sierra?
Repair costs can vary, but replacing a transmission solenoid typically ranges from $200 to $500, depending on labor and parts. Wiring repairs or TCM replacement may cost more.
8. Can a low transmission fluid level cause the P2815 code?
While low transmission fluid alone may not directly cause the code, it can lead to poor solenoid performance and eventual circuit issues. Always check and maintain proper fluid levels.
9. Do I need to reprogram the TCM when fixing the P2815 code?
Reprogramming the TCM may be necessary if it has been damaged or if a software update is required to resolve the issue.
10. What tools are needed to troubleshoot the P2815 code?
Helpful tools include an OBDII scanner, a multimeter for testing electrical circuits, and basic hand tools to inspect and replace the solenoid or wiring.
Discuss the causes and fixes for P2815 2015 GMC Sierra OBDII Code
Code P2815 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
