P2815 2014 GMC Sierra Code - Transmission Control Solenoid Valve 7 Control Circuit High Voltage
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2815 2014 GMC Sierra indicates Transmission Control Solenoid Valve 7 Control Circuit High Voltage.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2815 2014 GMC Sierra Description
What are the Possible Causes of the DTC P2815 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2815 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2815 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2815 2014 GMC Sierra code?
Need more information on how to fix the P2815 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2815 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2815 2014 GMC Sierra Code
1. What does the OBDII code P2815 mean on a 2014 GMC Sierra?
P2815 refers to "Transmission Control Solenoid Valve 7 Control Circuit High Voltage," indicating a potential issue with the control circuit for solenoid 7 in the transmission.
2. What are the common symptoms of the P2815 code in a 2014 GMC Sierra?
Common symptoms include harsh or delayed shifting, transmission slipping, erratic gear changes, reduced fuel efficiency, or the transmission going into limp mode.
3. What causes the P2815 code to appear?
Causes may include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, a malfunctioning transmission control module (TCM), or electrical issues such as a short or open circuit.
4. Can driving with a P2815 code damage the transmission?
Yes, driving with this code can lead to severe transmission damage over time due to improper shifting and increased strain on internal components.
5. How do you diagnose the P2815 code in a GMC Sierra?
Diagnosis involves inspecting the wiring and connectors for damage, testing the solenoid for proper function, and checking for voltage and continuity in the control circuit using a multimeter.
6. How is the P2815 code typically repaired?
Repairs may include replacing the faulty solenoid, repairing damaged wiring or connectors, updating or reprogramming the TCM, or replacing the TCM if necessary.
7. What tools are needed to troubleshoot the P2815 code?
Tools include an OBDII scanner, a multimeter, and potentially a transmission pressure tester if further diagnosis is required.
8. Can low transmission fluid cause the P2815 code?
Low transmission fluid is not a direct cause of P2815 but can contribute to poor solenoid operation and shifting issues, so fluid levels should be checked during diagnosis.
9. Is the P2815 code covered under warranty for a 2014 GMC Sierra?
Coverage depends on the vehicle’s warranty status and terms; consult your dealership or warranty documentation for details.
10. How much does it cost to fix the P2815 code on a GMC Sierra?
Repair costs vary depending on the issue but could range from $150 to $500 for solenoid replacement or wiring repairs, and higher if the TCM needs replacement or programming.
Discuss the causes and fixes for P2815 2014 GMC Sierra OBDII Code
Code P2815 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
