P2813 2018 GMC Sierra Code - Transmission Control Solenoid Valve 7 Performance
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2813 2018 GMC Sierra indicates Transmission Control Solenoid Valve 7 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2813 2018 GMC Sierra Description
What are the Possible Causes of the DTC P2813 2018 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2813 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2813 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2813 2018 GMC Sierra code?
Need more information on how to fix the P2813 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2813 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2813 2018 GMC Sierra Code
1. What does the OBDII code P2813 mean on a 2018 GMC Sierra?
P2813 indicates an issue with the performance of Transmission Control Solenoid Valve 7, which helps regulate fluid flow for proper gear shifting.
2. What are common symptoms of the P2813 code in a 2018 GMC Sierra?
Common symptoms include difficulty shifting gears, transmission slipping, reduced fuel efficiency, and the illumination of the check engine light.
3. What causes the P2813 code to appear on a GMC Sierra?
Possible causes include a faulty transmission solenoid, low or dirty transmission fluid, damaged wiring or connectors, or internal transmission issues.
4. Can driving with the P2813 code damage my 2018 GMC Sierra?
Yes, driving with this code can lead to further transmission damage or unsafe driving conditions if not addressed promptly.
5. How can I diagnose the P2813 code on my GMC Sierra?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the solenoid and wiring, and checking the transmission fluid level and condition.
6. How much does it cost to fix the P2813 code on a 2018 GMC Sierra?
Repair costs vary but may range from $150 to $400 for solenoid replacement or more if internal transmission repairs are needed.
7. Can low transmission fluid cause the P2813 code on a GMC Sierra?
Yes, low or contaminated transmission fluid can affect solenoid performance and trigger this code.
8. Is it possible to fix the P2813 code myself?
If you have mechanical experience, you may be able to replace the solenoid or clean connections, but professional assistance is recommended for complex repairs.
9. How do I reset the P2813 code on my 2018 GMC Sierra after repairs?
Use an OBDII scanner to clear the code, but ensure the issue is resolved to prevent the code from returning.
10. How urgent is it to fix the P2813 code on a GMC Sierra?
It’s important to address this code promptly to avoid further transmission damage and ensure safe vehicle operation.
Discuss the causes and fixes for P2813 2018 GMC Sierra OBDII Code
Code P2813 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
