AutoCodes – Generic – P2811

P2811 Code - Pressure Control Solenoid 'G' Intermittent

Quick Answer

The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty Pressure Control Solenoid 'G', Pressure Control Solenoid 'G' harness is open or shorted, Pressure Control Solenoid 'G' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2811 indicates Pressure Control Solenoid 'G' Intermittent.
Common causes: Common causes include Faulty Pressure Control Solenoid 'G', Pressure Control Solenoid 'G' harness is open or shorted, Pressure Control Solenoid 'G' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,781

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 16, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2811 Description

The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. 5th or 6th gear). Then the TCM compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical problems.

OBDII Code P2811 - Pressure Control Solenoid 'G' Intermittent - AutoCodes.com — P2811 Code - Pressure Control Solenoid 'G' Intermittent

What does this mean?

What are the Possible Causes of the DTC P2811?

Faulty Pressure Control Solenoid 'G'
Pressure Control Solenoid 'G' harness is open or shorted
Pressure Control Solenoid 'G' circuit poor electrical connection
Blockage in Transmission Valve Body

How to Fix the DTC P2811?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2811 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2811 code?

Need more information on how to fix the P2811 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2811 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.