AutoCodes – Toyota – P2810 2014 Toyota RAV4

P2810 2014 Toyota RAV4 Code - Pressure Control Solenoid 'G' Electrical

Quick Answer

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2810 2014 Toyota RAV4 indicates Pressure Control Solenoid 'G' Electrical.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 731

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 12, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2810 2014 Toyota RAV4 Description

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated.
The ECM commands gear shifts by turning the shift solenoid valves on or off. When there is an open or short circuit in any shift solenoid valve circuit, the ECM detects the problem and illuminates the MIL and stores the Diagnostic Trouble Code (DTC). And the ECM performs the fail-safe function and turns the other normal shift solenoid valves on or off. (In case of an open or short circuit, the ECM stops sending current to the circuit.)

OBDII Code P2810 2014 Toyota RAV4 - Pressure Control Solenoid 'G' Electrical - AutoCodes.com — P2810 2014 Toyota RAV4 Code - Pressure Control Solenoid 'G' Electrical

What does this mean?

What are the Possible Causes of the DTC P2810 2014 Toyota RAV4?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4)
Pressure Control Solenoid 'G' valve harness is open or shorted
Pressure Control Solenoid 'G' valve circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P2810 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2810 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2810 2014 Toyota RAV4 code?

Need more information on how to fix the P2810 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2810 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2810 2014 Toyota RAV4 Code

1. What does OBDII code P2810 for a 2014 Toyota RAV4 indicate?

The code P2810 on a 2014 Toyota RAV4 refers to an issue with the Pressure Control Solenoid 'G' Electrical circuit.

2. What are the common symptoms of OBDII code P2810 in a 2014 Toyota RAV4?

Common symptoms of code P2810 in a 2014 Toyota RAV4 include harsh shifting, transmission slippage, and illuminated warning lights on the dashboard.

3. What can cause OBDII code P2810 in a 2014 Toyota RAV4?

Potential causes of code P2810 in a 2014 Toyota RAV4 include a faulty pressure control solenoid 'G', wiring issues in the electrical circuit, or a malfunctioning transmission control module.

4. How serious is OBDII code P2810 in a 2014 Toyota RAV4?

Code P2810 can affect the performance and reliability of the transmission in a 2014 Toyota RAV4, potentially leading to further damage if not addressed promptly.

5. How can I diagnose OBDII code P2810 in my 2014 Toyota RAV4?

Diagnosing code P2810 typically involves using a diagnostic scanner to retrieve the code, inspecting the pressure control solenoid 'G' and its electrical connections, and checking for any visible signs of damage.

6. Can I drive my 2014 Toyota RAV4 with OBDII code P2810?

It is not recommended to drive your 2014 Toyota RAV4 with code P2810, as it can lead to transmission issues and potentially unsafe driving conditions.

7. How much does it cost to repair OBDII code P2810 in a 2014 Toyota RAV4?

The cost of repairing code P2810 in a 2014 Toyota RAV4 can vary depending on the exact cause of the issue, but it may involve replacing the pressure control solenoid 'G', repairing wiring, or addressing transmission control module issues.

8. Can I reset OBDII code P2810 in my 2014 Toyota RAV4?

While you can clear the code using a diagnostic scanner, it is important to address the underlying issue causing code P2810 to prevent it from recurring.

9. Are there any DIY tips for fixing OBDII code P2810 in a 2014 Toyota RAV4?

DIY tips for addressing code P2810 may include checking and cleaning electrical connections, ensuring proper wiring, and inspecting the pressure control solenoid 'G' for any visible damage.

10. How can I prevent OBDII code P2810 from appearing in my 2014 Toyota RAV4?

Regular maintenance, such as checking and replacing transmission fluid on schedule, can help prevent issues like code P2810 in a 2014 Toyota RAV4.