P2808 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 7 Stuck Off
Quick Answer
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2808 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 7 Stuck Off.
- Common causes
- Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2808 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P2808 2014 Chevrolet Silverado?
- Faulty Transfer Case Shift Control Switch
- Transfer Case Shift Control Switch harness is open or shorted
- Transfer Case Shift Control Switch circuit poor electrical connection
How to Fix the DTC P2808 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2808 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2808 2014 Chevrolet Silverado code?
Need more information on how to fix the P2808 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2808 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2808 2014 Chevrolet Silverado Code
1. What does the OBDII code P2808 mean on a 2014 Chevrolet Silverado?
P2808 indicates that the Transmission Control Module (TCM) has detected that solenoid valve 7 in the transmission is stuck in the "off" position and is not functioning as intended.
2. What are the common symptoms of a P2808 code in a 2014 Chevrolet Silverado?
Symptoms may include harsh or delayed shifting, the transmission being stuck in a single gear, poor acceleration, reduced fuel efficiency, or the check engine light being illuminated.
3. What causes the P2808 code to appear in a 2014 Chevrolet Silverado?
Common causes include a faulty transmission solenoid, low or dirty transmission fluid, damaged or corroded wiring/connectors, or a malfunctioning Transmission Control Module (TCM).
4. Can I drive my 2014 Chevrolet Silverado with a P2808 code?
Driving with a P2808 code is not recommended, as it can lead to further transmission damage, reduced performance, and unsafe driving conditions due to shifting problems.
5. How do I diagnose a P2808 code in my 2014 Chevrolet Silverado?
Diagnosis typically involves scanning the vehicle with an OBDII tool, inspecting the transmission fluid level and condition, checking the wiring and connectors for damage, and testing the solenoid functionality with specialized tools.
6. How can I fix the P2808 code on my 2014 Chevrolet Silverado?
Repairs may include replacing the faulty transmission solenoid, cleaning or replacing transmission fluid, repairing damaged wiring or connectors, or reprogramming or replacing the TCM if needed.
7. What does "solenoid valve 7 stuck off" mean in the context of the P2808 code?
It means that the transmission solenoid responsible for controlling a specific fluid flow path (solenoid 7) is stuck in the "off" position, preventing proper gear shifting.
8. How much does it cost to repair a P2808 code on a 2014 Chevrolet Silverado?
Repair costs vary, but replacing a transmission solenoid typically ranges from $200 to $500, depending on labor rates and parts costs. Additional repairs, such as TCM replacement, may increase the cost.
9. Can low transmission fluid cause the P2808 code in my 2014 Chevrolet Silverado?
Yes, low or dirty transmission fluid can cause solenoid valves to malfunction, leading to a P2808 code. Checking and maintaining proper fluid levels is essential.
10. Will resetting the check engine light fix the P2808 code on my 2014 Chevrolet Silverado?
Resetting the light may temporarily erase the code, but the underlying issue will persist. Proper diagnosis and repair are necessary to resolve the problem.
Discuss the causes and fixes for P2808 2014 Chevrolet Silverado OBDII Code
Code P2808 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
