AutoCodes – Toyota – P2808 2013 Toyota RAV4

P2808 2013 Toyota RAV4 Code - Pressure Control Solenoid 'G' Performance

Quick Answer

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2808 2013 Toyota RAV4 indicates Pressure Control Solenoid 'G' Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 524

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 12, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2808 2013 Toyota RAV4 Description

Changing from 1st to 6th is performed by the Engine Control Module (ECM) turning shift solenoid valves SL1, SL2, SL3, SL4, and SL on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated.
The ECM commands gear shifts by turning the shift solenoid valves on and off. According to the input shaft speed, intermediate (counter) shaft speed, and output shaft speed, the ECM detects the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). When the gear commanded by the ECM and the actual gear are not the same, the ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).

OBDII Code P2808 2013 Toyota RAV4 - Pressure Control Solenoid 'G' Performance - AutoCodes.com — P2808 2013 Toyota RAV4 Code - Pressure Control Solenoid 'G' Performance

What does this mean?

What are the Possible Causes of the DTC P2808 2013 Toyota RAV4?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid 'G' valve (Shift Solenoid Valve SL4)
Pressure Control Solenoid 'G' valve harness is open or shorted
Pressure Control Solenoid 'G' valve circuit poor electrical connection
Transmission valve body assembly is blocked
Faulty Automatic transaxle assembly

How to Fix the DTC P2808 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2808 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2808 2013 Toyota RAV4 code?

Need more information on how to fix the P2808 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2808 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2808 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code P2808 in a 2013 Toyota RAV4?

The common symptoms of OBDII code P2808 in a 2013 Toyota RAV4 include harsh shifting, transmission slipping, and decreased fuel efficiency.

2. What does the OBDII code P2808 for Pressure Control Solenoid 'G' Performance indicate in a 2013 Toyota RAV4?

The OBDII code P2808 indicates a performance issue with the Pressure Control Solenoid 'G' in the transmission of a 2013 Toyota RAV4.

3. What are some possible causes of OBDII code P2808 in a 2013 Toyota RAV4?

Possible causes of OBDII code P2808 in a 2013 Toyota RAV4 include a faulty pressure control solenoid 'G', low transmission fluid levels, or a malfunctioning transmission control module.

4. How can I diagnose OBDII code P2808 in my 2013 Toyota RAV4?

Diagnosing OBDII code P2808 in a 2013 Toyota RAV4 involves using a scan tool to read the code, checking the transmission fluid level and condition, and inspecting the pressure control solenoid 'G' for any visible damage.

5. Is it safe to continue driving my 2013 Toyota RAV4 with OBDII code P2808?

It is not recommended to continue driving your 2013 Toyota RAV4 with OBDII code P2808, as it can lead to further transmission damage and potential safety hazards.

6. How can I repair OBDII code P2808 in my 2013 Toyota RAV4?

Repairing OBDII code P2808 in a 2013 Toyota RAV4 may involve replacing the pressure control solenoid 'G', addressing any transmission fluid issues, or reprogramming the transmission control module.

7. Can I reset OBDII code P2808 in my 2013 Toyota RAV4 without fixing the underlying issue?

Resetting OBDII code P2808 without addressing the underlying issue may temporarily turn off the check engine light, but the problem will likely reoccur until the root cause is resolved.

8. How much does it typically cost to fix OBDII code P2808 in a 2013 Toyota RAV4?

The cost to fix OBDII code P2808 in a 2013 Toyota RAV4 can vary depending on the specific repairs needed, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. Are there any preventive maintenance steps to avoid OBDII code P2808 in a 2013 Toyota RAV4?

Regularly checking and maintaining proper transmission fluid levels, following recommended service intervals, and addressing any transmission issues promptly can help prevent OBDII code P2808 in a 2013 Toyota RAV4.

10. Can a DIY enthusiast with moderate automotive knowledge fix OBDII code P2808 in a 2013 Toyota RAV4?

While some experienced DIY enthusiasts may be able to address simpler causes of OBDII code P2808, diagnosing and repairing more complex transmission issues typically requires professional expertise and specialized tools.