P2808 2010 Toyota Camry Code - Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4
Quick Answer
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty shift solenoid valve SL4 remains open or closed, Shift solenoid valve SL4 harness is open or shorted, Shift solenoid valve SL4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2808 2010 Toyota Camry indicates Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4 .
- Common causes
- Common causes include Faulty shift solenoid valve SL4 remains open or closed, Shift solenoid valve SL4 harness is open or shorted, Shift solenoid valve SL4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2808 2010 Toyota Camry Description
What are the Possible Causes of the DTC P2808 2010 Toyota Camry?
- Faulty shift solenoid valve SL4 remains open or closed
- Shift solenoid valve SL4 harness is open or shorted
- Shift solenoid valve SL4 circuit poor electrical connection
- Valve body is blocked
How to Fix the DTC P2808 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2808 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2808 2010 Toyota Camry code?
Need more information on how to fix the P2808 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2808 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2808 2010 Toyota Camry Code
1. What are the common symptoms of OBDII code P2808 in a 2010 Toyota Camry?
- Common symptoms include harsh shifting, transmission slipping, decreased fuel efficiency, and the transmission going into limp mode.
2. What can cause the Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4 error code in a 2010 Toyota Camry?
- Common causes of this code may include a faulty pressure control solenoid, low transmission fluid levels, a clogged transmission filter, or wiring issues.
3. How can I diagnose the Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4 error code in my 2010 Toyota Camry?
- Diagnosis typically involves using a scan tool to retrieve the OBDII code, checking the transmission fluid level and condition, inspecting the wiring and connectors, and testing the pressure control solenoid.
4. What are the potential repair options for resolving OBDII code P2808 in a 2010 Toyota Camry?
- Repair options may include replacing the pressure control solenoid, performing a transmission fluid flush and filter replacement, repairing or replacing damaged wiring, and ensuring proper fluid levels.
5. Can I continue driving my 2010 Toyota Camry with the Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4 error code?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the transmission. It is best to address the issue promptly.
6. How much does it typically cost to repair OBDII code P2808 in a 2010 Toyota Camry?
- The cost of repairs can vary depending on the specific cause of the code and the labor rates in your area. However, expect costs to range from $200 to $600 for parts and labor.
7. Are there any preventive maintenance measures to avoid encountering the Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4 error code?
- Regularly servicing the transmission, ensuring proper fluid levels and quality, and addressing any transmission issues promptly can help prevent the occurrence of this code.
8. Is it possible to reset the OBDII code P2808 in a 2010 Toyota Camry without fixing the underlying issue?
- While clearing the code may temporarily turn off the check engine light, it will not fix the underlying problem causing the code to trigger. It is recommended to address the root cause of the issue.
9. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P2808 in a 2010 Toyota Camry?
- Depending on the specific cause of the code, some repairs related to this issue may be feasible for a DIY enthusiast. However, certain repairs, such as internal transmission component replacements, may require professional expertise.
10. How long does it typically take to repair OBDII code P2808 in a 2010 Toyota Camry?
- Repair times can vary based on the complexity of the issue and the availability of parts. In general, expect the repair to take anywhere from a few hours to a full day.
Discuss the causes and fixes for P2808 2010 Toyota Camry OBDII Code
Code P2808 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
