AutoCodes – Chevrolet – P27A7 2014 Chevrolet Silverado

P27A7 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 1 Calibration Incorrect

Quick Answer

The Transmission Control Solenoid Valve 1, 2, 3, 4, 5, 6, 7 have a unique current versus oil pressure characteristic that is used to properly upshift or downshift the transmission. Common causes include Solenoid Valve Characterization Reprogramming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P27A7 2014 Chevrolet Silverado indicates Transmission Control Solenoid Valve 1 Calibration Incorrect.
Common causes: Common causes include Solenoid Valve Characterization Reprogramming.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 258

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 22, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P27A7 2014 Chevrolet Silverado Description

The Transmission Control Solenoid Valve 1, 2, 3, 4, 5, 6, 7 have a unique current versus oil pressure characteristic that is used to properly upshift or downshift the transmission. The data for each solenoid valve is programmed into the Transmission Control Module (TCM). The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Solenoid Valve Calibration Data has not been programmed.

OBDII Code P27A7 2014 Chevrolet Silverado - Transmission Control Solenoid Valve 1 Calibration Incorrect - AutoCodes.com — P27A7 2014 Chevrolet Silverado Code - Transmission Control Solenoid Valve 1 Calibration Incorrect

What does this mean?

What are the Possible Causes of the DTC P27A7 2014 Chevrolet Silverado?

Solenoid Valve Characterization Reprogramming

How to Fix the DTC P27A7 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P27A7 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P27A7 2014 Chevrolet Silverado code?

Need more information on how to fix the P27A7 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P27A7 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P27A7 2014 Chevrolet Silverado Code

1. What does the OBDII code P27A7 mean on a 2014 Chevrolet Silverado?

P27A7 indicates that the Transmission Control Module (TCM) has detected an issue with the calibration of solenoid valve 1 in the transmission.

2. What are the common symptoms of the P27A7 code on a Chevrolet Silverado?

Symptoms may include transmission slipping, harsh or erratic shifting, reduced fuel efficiency, or the vehicle entering limp mode.

3. What causes the P27A7 code to appear in a 2014 Chevrolet Silverado?

Common causes include faulty transmission solenoid valve 1, incorrect solenoid calibration, TCM software issues, or wiring and connector problems in the transmission system.

4. Can driving with the P27A7 code cause further damage?

Yes, continuing to drive with this code can lead to further transmission damage or unsafe driving conditions due to improper shifting.

5. How is the P27A7 code diagnosed?

A mechanic will use a scan tool to verify the code, inspect the wiring and connectors, check the transmission fluid level and condition, and test the solenoid for proper function.

6. How do you fix the P27A7 code on a 2014 Chevrolet Silverado?

Repairs may include replacing the faulty solenoid, reprogramming the TCM, repairing damaged wiring, or performing a transmission fluid and filter change.

7. Is it necessary to reprogram the TCM to fix the P27A7 code?

In some cases, reprogramming or updating the TCM software may be required to resolve the calibration issue.

8. What is the cost of repairing the P27A7 code on a 2014 Silverado?

Costs can vary, but replacing a solenoid or reprogramming the TCM typically ranges from $150 to $500, depending on labor and parts.

9. Can low or dirty transmission fluid cause the P27A7 code?

Yes, low or contaminated transmission fluid can affect solenoid performance and trigger this code.

10. Do I need a professional mechanic to fix the P27A7 code?

While some basic inspections can be done at home, diagnosing and repairing transmission-related issues often requires specialized tools and expertise, so a professional mechanic is recommended.