AutoCodes – Dodge – P2795 Dodge

P2795 Dodge Code - Gear Shift Direction Circuit High

Quick Answer

The Transmission Control Module (TCM) monitors the Gear Shift Direction Circuit signal. Common causes include Defective Range Sensor, Faulty Transmission Shifter, Transmission Shifter harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2795 Dodge indicates Gear Shift Direction Circuit High.
Common causes: Common causes include Defective Range Sensor, Faulty Transmission Shifter, Transmission Shifter harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,052

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2795 Dodge Description

The Transmission Control Module (TCM) monitors the Gear Shift Direction Circuit signal. The TCM sets the OBDII code when the Gear Shift Direction Circuit Circuit signal is out of factory specifications.

OBDII Code P2795 Dodge - Gear Shift Direction Circuit High - AutoCodes.com — P2795 Dodge Code - Gear Shift Direction Circuit High

What does this mean?

What are the Possible Causes of the DTC P2795 Dodge?

Defective Range Sensor
Faulty Transmission Shifter
Transmission Shifter harness is open or shorted
Transmission Shifter circuit poor electrical connection

How to Fix the DTC P2795 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2795 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2795 Dodge code?

Need more information on how to fix the P2795 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2795 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2795 Dodge Code

1. What does the OBDII code P2795 mean on a Dodge vehicle?

P2795 indicates a "Gear Shift Direction Circuit High" fault, meaning the Powertrain Control Module (PCM) has detected an issue in the gear shift direction sensor circuit, specifically a high voltage condition.

2. What are the symptoms of code P2795 in a Dodge?

Common symptoms include difficulty shifting gears, the vehicle being stuck in one gear, erratic transmission behavior, or the transmission not responding to driver input.

3. What causes the P2795 code in a Dodge?

Possible causes include a faulty gear shift direction sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning PCM, or a related electrical short or open circuit.

4. Can I drive my Dodge with the P2795 code?

Driving with this code is not recommended, as it may lead to transmission performance issues, unsafe driving conditions, or further damage to the transmission system.

5. How is the P2795 code diagnosed in a Dodge?

A technician will typically use a scan tool to confirm the code, inspect the gear shift direction sensor and its wiring for damage, and test the circuit for proper voltage and continuity.

6. How do I fix the P2795 code on a Dodge vehicle?

Repairs may include replacing the gear shift direction sensor, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.

7. How much does it cost to fix the P2795 code on a Dodge?

Repair costs vary but typically range from $150 to $500, depending on whether the sensor, wiring, or PCM needs replacement.

8. Can a bad battery cause the P2795 code in a Dodge?

While unlikely, a weak or failing battery can sometimes cause electrical issues that may trigger codes like P2795. Ensure the battery and charging system are functioning properly.

9. Is the P2795 code specific to Dodge vehicles?

No, the P2795 code is a generic OBDII code, but the specific symptoms and repair steps can vary depending on the vehicle make and model.

10. Will clearing the P2795 code fix the issue on my Dodge?

Clearing the code will remove it temporarily, but if the underlying problem is not resolved, the code will likely return. Proper diagnosis and repair are necessary.