P2793 Dodge Code - Gear Shift Direction Circuit
Quick Answer
The Transmission Control Module (TCM) monitors the Gear Shift Direction Circuit signal. Common causes include Defective Range Sensor, Faulty Transmission Shifter, Transmission Shifter harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2793 Dodge indicates Gear Shift Direction Circuit.
- Common causes
- Common causes include Defective Range Sensor, Faulty Transmission Shifter, Transmission Shifter harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2793 Dodge Description
What are the Possible Causes of the DTC P2793 Dodge?
- Defective Range Sensor
- Faulty Transmission Shifter
- Transmission Shifter harness is open or shorted
- Transmission Shifter circuit poor electrical connection
How to Fix the DTC P2793 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2793 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2793 Dodge code?
Need more information on how to fix the P2793 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2793 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2793 Dodge Code
1. What does the OBDII code P2793 mean on a Dodge?
The P2793 code indicates an issue with the Gear Shift Direction Circuit, which monitors the signal for gear shift direction in the transmission.
2. What are the common symptoms of a P2793 code in a Dodge?
Symptoms may include difficulty shifting gears, the transmission stuck in one gear, erratic shifting, or the Check Engine Light being illuminated.
3. What causes the P2793 Gear Shift Direction Circuit code?
Common causes include a faulty gear shift direction sensor, damaged wiring or connectors, a malfunctioning transmission control module (TCM), or internal transmission issues.
4. Can I drive my Dodge with a P2793 code?
While the vehicle may still be drivable, ignoring the code can lead to further transmission damage or unsafe driving conditions. It’s best to address the issue promptly.
5. How do you diagnose the P2793 code in a Dodge?
Diagnosis typically involves scanning for codes, inspecting the gear shift direction sensor and its wiring, and testing the sensor and TCM for proper operation.
6. How is the P2793 code fixed on a Dodge?
Repairs may include replacing the gear shift direction sensor, repairing or replacing damaged wiring, or reprogramming/updating the TCM.
7. How much does it cost to fix the P2793 code on a Dodge?
The cost varies depending on the exact issue but typically ranges from $150 to $500, including parts and labor.
8. Can a low transmission fluid level cause a P2793 code?
Low transmission fluid is unlikely to directly cause the P2793 code but can contribute to shifting problems that may trigger related codes.
9. Is the P2793 code specific to Dodge vehicles?
No, the P2793 code is a generic OBDII code and can appear on any vehicle with an OBDII system, but the diagnostic and repair process may vary by make and model.
10. Will clearing the P2793 code fix the problem?
Clearing the code without addressing the underlying issue will not resolve the problem; the code will likely return after a short time.
Discuss the causes and fixes for P2793 Dodge OBDII Code
Code P2793 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
