P2769 2018 Toyota RAV4 Code - Short in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL
Quick Answer
Shift solenoid valve SL is turned on and off by signals from the Engine Control Module (ECM) to control the hydraulic pressure acting on the lock-up relay valve, which then controls the operation of the lock-up clutch. Common causes include Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU), Torque Converter Clutch Pressure Control Solenoid harness is open or shorted, Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2769 2018 Toyota RAV4 indicates Short in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL.
- Common causes
- Common causes include Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU), Torque Converter Clutch Pressure Control Solenoid harness is open or shorted, Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2769 2018 Toyota RAV4 Description
Based on the signals from the throttle position sensor, airflow meter, and crankshaft position sensor, the ECM sends a signal to shift solenoid valve SL to regulate the hydraulic pressure and provide smooth torque converter engagement. Shift solenoid valve SL responds to commands from the ECM. The valve controls the lock-up relay valve to perform the torque-converter lock-up function. If the ECM detects an open or short circuit for shift solenoid valve SL, it will illuminate the MIL and store the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2769 2018 Toyota RAV4?
- Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU)
- Torque Converter Clutch Pressure Control Solenoid harness is open or shorted
- Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P2769 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2769 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2769 2018 Toyota RAV4 code?
Need more information on how to fix the P2769 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2769 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2769 2018 Toyota RAV4 Code
1. What does the OBDII code P2769 mean on a 2018 Toyota RAV4?
P2769 indicates a "Short in Torque Converter Clutch Solenoid Circuit Shift Solenoid Valve SL," meaning there is an electrical issue in the torque converter clutch solenoid circuit.
2. What are the common symptoms of code P2769 in a 2018 Toyota RAV4?
Symptoms include poor fuel efficiency, harsh or delayed shifting, transmission slipping, or the vehicle staying in one gear.
3. What causes the P2769 code in a 2018 Toyota RAV4?
Common causes include a shorted or damaged torque converter clutch solenoid, faulty wiring or connectors, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2018 Toyota RAV4 with the P2769 code?
Driving with the P2769 code is not recommended as it can lead to transmission damage or reduced performance over time.
5. How is the P2769 code diagnosed in a 2018 Toyota RAV4?
A mechanic will use a scan tool to confirm the code, inspect the solenoid circuit wiring and connectors, and test the solenoid and TCM for proper operation.
6. How do I fix the P2769 code on a 2018 Toyota RAV4?
Repairs may involve replacing the torque converter clutch solenoid, repairing or replacing damaged wiring, or reprogramming or replacing the TCM.
7. How much does it cost to repair the P2769 code on a 2018 Toyota RAV4?
Repair costs vary, but replacing the solenoid typically ranges from $200 to $500, depending on labor and parts.
8. Can a low transmission fluid level cause the P2769 code in a 2018 Toyota RAV4?
While low fluid is not a direct cause, it can lead to overheating and damage to the solenoid, which may trigger the code.
9. Is the P2769 code covered under warranty for a 2018 Toyota RAV4?
It depends on your vehicle's warranty coverage. Check if your powertrain warranty is still active, as it may cover the repair.
10. Will clearing the P2769 code fix the issue on a 2018 Toyota RAV4?
Clearing the code will remove the error temporarily, but the underlying problem must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2769 2018 Toyota RAV4 OBDII Code
Code P2769 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
