AutoCodes – Scion – P2767 Scion

P2767 Scion Code - Input/Turbine Speed Sensor 'B' Circuit No Signal

Quick Answer

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). Common causes include Faulty Input Speed Sensor, Input Speed Sensor harness is open or shorted, Input Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2767 Scion indicates Input/Turbine Speed Sensor 'B' Circuit No Signal.
Common causes
Common causes include Faulty Input Speed Sensor, Input Speed Sensor harness is open or shorted, Input Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,909
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 12, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2767 Scion Description

The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission Control Module (TCM) and Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications.
OBDII Code P2767 Scion - Input/Turbine Speed Sensor 'B' Circuit No Signal - AutoCodes.com
P2767 Scion Code - Input/Turbine Speed Sensor 'B' Circuit No Signal

What are the Possible Causes of the DTC P2767 Scion?

  • Faulty Input Speed Sensor
  • Input Speed Sensor harness is open or shorted
  • Input Speed Sensor circuit poor electrical connection

How to Fix the DTC P2767 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2767 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2767 Scion code?

Need more information on how to fix the P2767 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2767 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2767 Scion Code

What does the OBDII code P2767 mean for a Scion?

Code P2767 indicates that the Input/Turbine Speed Sensor 'B' is not sending a signal to the transmission control module (TCM).

What are the common symptoms of code P2767 in a Scion?

Symptoms may include erratic shifting, poor acceleration, reduced fuel efficiency, or the transmission going into limp mode.

What causes the P2767 code to appear?

Common causes include a faulty input/turbine speed sensor, damaged wiring or connectors, or a malfunctioning transmission control module.

Can driving with code P2767 damage my Scion?

Driving with this code can lead to further transmission issues if not addressed, so repairs should be made promptly.

How can I diagnose the P2767 code on my Scion?

Start by inspecting the wiring and connectors for damage, then test the input/turbine speed sensor for proper functionality using a multimeter.

How do I fix the P2767 code on my Scion?

Repairs might involve replacing the input/turbine speed sensor, repairing damaged wiring, or reprogramming or replacing the transmission control module.

How much does it cost to fix code P2767 on a Scion?

Repair costs can range from $150 to $500 depending on whether the sensor, wiring, or TCM needs replacement or repair.

Can a bad input/turbine speed sensor cause transmission problems?

Yes, a faulty sensor can disrupt transmission operation, leading to issues like erratic shifting or limp mode.

Is it safe to clear the P2767 code without fixing the problem?

Clearing the code without addressing the underlying issue will likely result in the code returning and continued transmission problems.

Can a software update fix the P2767 code on a Scion?

In some cases, a TCM software update may resolve the issue, but usually, the problem involves hardware like the sensor or wiring.

Discuss the causes and fixes for P2767 Scion OBDII Code

Code P2767 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play