P2757 2016 Toyota RAV4 Code - Torque Converter Clutch Pressure Control Solenoid Performance Shift Solenoid Valve SLU
Quick Answer
The Engine Control Module (ECM) uses the signals from the throttle position sensor, airflow meter, input turbine speed sensor, output speed sensor, and crankshaft position sensor to monitor the engagement condition of the lock-up clutch. Common causes include Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU), Torque Converter Clutch Pressure Control Solenoid harness is open or shorted, Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2757 2016 Toyota RAV4 indicates Torque Converter Clutch Pressure Control Solenoid Performance Shift Solenoid Valve SLU.
- Common causes
- Common causes include Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU), Torque Converter Clutch Pressure Control Solenoid harness is open or shorted, Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2757 2016 Toyota RAV4 Description
The ECM compares the engagement condition of the lock-up clutch with the lock-up schedule in the ECM memory to detect mechanical problems of the shift solenoid valve (SLU), valve body, and torque converter.
Torque converter lock-up is controlled by the ECM based on the input turbine speed sensor (speed sensor NT), output speed sensor (speed sensor NC), engine speed, engine load, engine temperature, vehicle speed, ATF temperature and gear selection. The ECM determines the lock-up status of the torque converter by comparing the engine speed (NE) to the input turbine speed (NT). The ECM calculates the actual transmission gear by comparing the input turbine speed (NT) to the output shaft speed (NC). When conditions are appropriate, the ECM requests lock-up by applying control voltage to shift solenoid valve SLU. When shift solenoid valve SLU is turned on, it applies pressure to the lock-up relay valve and locks the torque converter.
If the ECM detects no lock-up after lock-up has been requested or if it detects lock-up when it is not requested, the ECM interprets this as a fault in shift solenoid valve SLU or lock-up system performance.
The ECM will turn on the MIL and store the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P2757 2016 Toyota RAV4?
- Faulty Torque Converter Clutch Pressure Control Solenoid (Shift Solenoid Valve SLU)
- Torque Converter Clutch Pressure Control Solenoid harness is open or shorted
- Torque Converter Clutch Pressure Control Solenoid circuit poor electrical connection
- Faulty Torque Converter Assembly
How to Fix the DTC P2757 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2757 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2757 2016 Toyota RAV4 code?
Need more information on how to fix the P2757 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2757 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2757 2016 Toyota RAV4 Code
1. What does the OBDII code P2757 mean on a 2016 Toyota RAV4?
P2757 refers to a Torque Converter Clutch (TCC) Pressure Control Solenoid Performance issue, specifically with the Shift Solenoid Valve SLU, which helps control the torque converter's engagement.
2. What are the common symptoms of code P2757 in a 2016 Toyota RAV4?
Common symptoms include poor fuel efficiency, transmission slipping, difficulty shifting gears, shuddering during acceleration, or the Check Engine Light being illuminated.
3. What causes the P2757 code to appear on a 2016 Toyota RAV4?
Possible causes include a faulty SLU solenoid, low or contaminated transmission fluid, a damaged torque converter, wiring or connector issues, or internal transmission problems.
4. Can I drive my 2016 Toyota RAV4 with a P2757 code?
While the vehicle may still be drivable, it is not recommended as it could lead to further transmission damage, reduced performance, and higher repair costs.
5. How do you diagnose a P2757 code on a 2016 Toyota RAV4?
Diagnosis typically involves scanning for codes, checking transmission fluid condition and level, inspecting wiring and connectors, and testing the SLU solenoid for proper operation.
6. What should I check first when troubleshooting a P2757 code in a 2016 Toyota RAV4?
Start by inspecting the transmission fluid for proper level and cleanliness. Contaminated or low fluid is a common issue that can trigger this code.
7. How much does it cost to fix a P2757 code on a 2016 Toyota RAV4?
The repair cost can vary depending on the issue. Replacing the SLU solenoid may cost $200–$400, but addressing internal transmission damage could exceed $1,000.
8. Can a P2757 code be caused by bad transmission fluid?
Yes, low or contaminated transmission fluid can cause the SLU solenoid to malfunction, leading to the P2757 code.
9. How do you reset the P2757 code on a 2016 Toyota RAV4?
After repairing the underlying issue, the code can be cleared using an OBDII scanner. However, ensure the problem is fully resolved to prevent the code from returning.
10. Is the P2757 code a common issue in a 2016 Toyota RAV4?
While not extremely common, it can occur, especially in vehicles with high mileage or if the transmission has not been properly maintained.
Discuss the causes and fixes for P2757 2016 Toyota RAV4 OBDII Code
Code P2757 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
