P2747 Dodge Code - Intermediate Shaft Speed Sensor 'B' Circuit No Signal
Quick Answer
The Engine Control Module (ECM) monitors the Intermediate Shaft Speed Sensor 'B' circuit signal. Common causes include Faulty Intermediate Shat Speed Sensor 'B', Intermediate Shat Speed Sensor 'B' harness is open or shorted, Intermediate Shat Speed Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2747 Dodge indicates Intermediate Shaft Speed Sensor 'B' Circuit No Signal.
- Common causes
- Common causes include Faulty Intermediate Shat Speed Sensor 'B', Intermediate Shat Speed Sensor 'B' harness is open or shorted, Intermediate Shat Speed Sensor 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2747 Dodge Description
What are the Possible Causes of the DTC P2747 Dodge?
- Faulty Intermediate Shat Speed Sensor 'B'
- Intermediate Shat Speed Sensor 'B' harness is open or shorted
- Intermediate Shat Speed Sensor 'B' circuit poor electrical connection
How to Fix the DTC P2747 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2747 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2747 Dodge code?
Need more information on how to fix the P2747 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2747 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2747 Dodge Code
What does OBDII code P2747 mean for a Dodge vehicle?
Code P2747 indicates a malfunction in the Intermediate Shaft Speed Sensor 'B' Circuit, where no signal is being received by the transmission control module.
What are the common symptoms of code P2747 in a Dodge?
Symptoms may include erratic shifting, transmission slipping, poor acceleration, illuminated check engine light, or the transmission going into "limp mode."
What causes code P2747 to appear on a Dodge?
Common causes include a faulty intermediate shaft speed sensor, damaged sensor wiring or connectors, short circuits, or issues within the transmission control module.
Can I drive my Dodge with code P2747 active?
Driving with code P2747 can lead to further transmission damage or unsafe driving conditions. It's best to address the issue as soon as possible.
How do I diagnose code P2747 on a Dodge?
Diagnosis involves inspecting the intermediate shaft speed sensor, checking wiring and connectors for damage, testing the sensor’s output, and scanning the transmission control module for additional fault codes.
What tools are needed to troubleshoot code P2747?
You’ll need an OBDII scanner, a multimeter for testing electrical connections, and possibly a repair manual for your Dodge model to locate the sensor and wiring.
How can I fix code P2747 in a Dodge?
Fixes may include replacing the intermediate shaft speed sensor, repairing damaged wiring, cleaning corroded connectors, or reprogramming the transmission control module.
How much does it cost to repair code P2747 on a Dodge?
Repair costs vary but typically range from $100-$300 for a sensor replacement, with additional labor costs if wiring repair or module reprogramming is needed.
Is code P2747 specific to Dodge vehicles?
No, code P2747 can appear in other vehicles equipped with OBDII systems, but the specific symptoms and causes may vary by make and model.
Can a faulty speed sensor cause transmission failure?
Yes, a faulty intermediate shaft speed sensor can lead to improper transmission operation, which, if unresolved, may result in significant transmission damage over time.
Discuss the causes and fixes for P2747 Dodge OBDII Code
Code P2747 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
