P2746 Dodge Code - Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance
Quick Answer
The Engine Control Module (ECM) monitors the Intermediate Shaft Speed Sensor 'B' circuit signal. Common causes include Faulty Intermediate Shat Speed Sensor 'B', Intermediate Shat Speed Sensor 'B' harness is open or shorted, Intermediate Shat Speed Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2746 Dodge indicates Intermediate Shaft Speed Sensor 'B' Circuit Range/Performance.
- Common causes
- Common causes include Faulty Intermediate Shat Speed Sensor 'B', Intermediate Shat Speed Sensor 'B' harness is open or shorted, Intermediate Shat Speed Sensor 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2746 Dodge Description
What are the Possible Causes of the DTC P2746 Dodge?
- Faulty Intermediate Shat Speed Sensor 'B'
- Intermediate Shat Speed Sensor 'B' harness is open or shorted
- Intermediate Shat Speed Sensor 'B' circuit poor electrical connection
How to Fix the DTC P2746 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2746 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2746 Dodge code?
Need more information on how to fix the P2746 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2746 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2746 Dodge Code
What does OBDII code P2746 mean for a Dodge vehicle?
P2746 indicates a problem with the Intermediate Shaft Speed Sensor 'B' circuit, specifically a range or performance issue.
What are the common symptoms of code P2746 in a Dodge?
Symptoms may include erratic or delayed shifting, transmission slipping, poor acceleration, or the Check Engine Light being illuminated.
What causes code P2746 on Dodge vehicles?
Common causes include a faulty Intermediate Shaft Speed Sensor, damaged wiring or connectors, transmission fluid issues, or a malfunctioning transmission control module (TCM).
How can I diagnose code P2746 on my Dodge?
Start by checking the wiring and connectors for damage, inspecting the sensor for faults, and verifying transmission fluid condition and level. A scan tool can help monitor sensor data for irregularities.
Can I drive my Dodge with code P2746 active?
Driving with this code may cause transmission performance issues, potentially leading to further damage. It’s recommended to address the problem promptly.
How do I fix code P2746 on a Dodge vehicle?
Repairs typically involve replacing the Intermediate Shaft Speed Sensor, fixing damaged wiring or connectors, or addressing transmission fluid issues.
Is code P2746 related to transmission fluid problems?
Yes, dirty or low transmission fluid can impact sensor performance and lead to this code. Check and replace fluid if necessary.
What tools are needed to fix code P2746?
You may need a scan tool for diagnostics, basic hand tools for sensor replacement, and a multimeter to test wiring and electrical circuits.
How much does it cost to repair code P2746 on a Dodge?
Repair costs vary depending on the issue, but sensor replacement typically ranges from $100 to $300, including parts and labor.
Can a faulty TCM cause code P2746 in Dodge vehicles?
Yes, a malfunctioning Transmission Control Module can contribute to this code if it fails to interpret sensor data correctly.
Discuss the causes and fixes for P2746 Dodge OBDII Code
Code P2746 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
