P2740 Dodge Code - Transmission Fluid Temperature Sensor 'B' Circuit
Quick Answer
The ATF (Automatic Transmission Fluid) Temperature Sensor converts the fluid temperature into a resistance value. Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2740 Dodge indicates Transmission Fluid Temperature Sensor 'B' Circuit.
- Common causes
- Common causes include Faulty Transmission Fluid Temperature Sensor, Transmission Fluid Temperature Sensor harness is open or shorted, Transmission Fluid Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2740 Dodge Description
What are the Possible Causes of the DTC P2740 Dodge?
- Faulty Transmission Fluid Temperature Sensor
- Transmission Fluid Temperature Sensor harness is open or shorted
- Transmission Fluid Temperature Sensor circuit poor electrical connection
How to Fix the DTC P2740 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2740 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2740 Dodge code?
Need more information on how to fix the P2740 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2740 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2740 Dodge Code
1. What does the OBDII code P2740 mean on a Dodge vehicle?
The P2740 code indicates an issue with the Transmission Fluid Temperature (TFT) Sensor 'B' Circuit, which monitors the temperature of the transmission fluid to optimize performance.
2. What are the common symptoms of code P2740 in a Dodge?
Symptoms may include erratic or delayed shifting, transmission overheating, poor fuel efficiency, or the vehicle entering limp mode.
3. What causes the P2740 code to appear in a Dodge?
Common causes include a faulty transmission fluid temperature sensor, damaged or corroded wiring in the sensor circuit, a malfunctioning PCM, or low or dirty transmission fluid.
4. Can I drive my Dodge with a P2740 code?
Driving with this code is not recommended as it may lead to transmission overheating, poor performance, or further damage to the transmission system.
5. How do I diagnose the P2740 code on a Dodge?
Diagnosis involves checking the transmission fluid level and condition, inspecting the TFT sensor and related wiring for damage, and testing the sensor's resistance with a multimeter.
6. How do I fix the P2740 code on my Dodge?
Repairs may include replacing the faulty TFT sensor, repairing or replacing damaged wiring or connectors, flushing and refilling transmission fluid, or reprogramming the PCM if needed.
7. Where is the Transmission Fluid Temperature Sensor located in a Dodge?
The TFT sensor is typically located inside the transmission pan, attached to the valve body or integrated into the transmission wiring harness.
8. How much does it cost to fix the P2740 code on a Dodge?
Repair costs can range from $150 to $400, depending on whether the issue is with the sensor, wiring, or fluid. PCM-related repairs may cost more.
9. Can low transmission fluid trigger the P2740 code in a Dodge?
Yes, insufficient or contaminated transmission fluid can affect the sensor's readings and trigger the P2740 code.
10. Do I need to reset the PCM after fixing the P2740 code?
Yes, after repairs, clearing the code with an OBDII scanner and test-driving the vehicle is necessary to confirm the issue is resolved.
Discuss the causes and fixes for P2740 Dodge OBDII Code
Code P2740 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
