P2738 DODGE - Pressure Control Solenoid 'F' Control Circuit Low
P2738 DODGE Possible Causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty line pressure solenoid valve 'F'
- Line pressure solenoid valve 'F' harness is open or shorted
- Line pressure solenoid valve 'F' circuit poor electrical connection
How do I fix code P2738 DODGE?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P2738 DODGE code
Labor: 1.0The cost of diagnosing the P2738 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P2738 DODGE DescriptionThe Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).
More InformationNeed more information on how to fix the P2738 DODGE code?
Get Access to Factory Service Manuals
Need more help?Get the P2738 Dodge code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2738 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks