P2736 2015 Chevrolet Silverado Code - Transmission Control Solenoid Valve 6 Control Circuit Open
Quick Answer
The Transmission Control Solenoid Valve Solenoid Valve is an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2736 2015 Chevrolet Silverado indicates Transmission Control Solenoid Valve 6 Control Circuit Open.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2736 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC P2736 2015 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Transmission Control Solenoid Valve
- Transmission Control Solenoid Valve harness is open or shorted
- Transmission Control Solenoid Valve circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P2736 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2736 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2736 2015 Chevrolet Silverado code?
Need more information on how to fix the P2736 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2736 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2736 2015 Chevrolet Silverado Code
1. What does the OBDII code P2736 mean for a 2015 Chevrolet Silverado?
The P2736 code indicates an open circuit in the Transmission Control Solenoid Valve 6, which controls shifting in the transmission.
2. What are the common symptoms of a P2736 code on a 2015 Chevrolet Silverado?
Symptoms may include harsh or delayed shifting, transmission stuck in one gear, poor fuel efficiency, or the illumination of the check engine light.
3. What causes the P2736 code to appear in a 2015 Chevrolet Silverado?
Common causes include a faulty transmission control solenoid, damaged wiring or connectors in the solenoid circuit, or an issue with the powertrain control module (PCM).
4. Can I drive my 2015 Chevrolet Silverado with a P2736 code?
Driving with this code is not recommended as it may lead to further transmission damage or unsafe driving conditions due to improper shifting.
5. How do I diagnose the P2736 code on a 2015 Chevrolet Silverado?
Diagnosis involves inspecting the transmission control solenoid, checking the wiring and connectors for damage, and using a scan tool to monitor solenoid operation and confirm the open circuit.
6. How can a P2736 code be fixed on a 2015 Chevrolet Silverado?
Repairs may include replacing the defective transmission control solenoid, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the PCM if needed.
7. How much does it cost to repair a P2736 code on a 2015 Chevrolet Silverado?
Costs vary but typically range from $150 to $400 for solenoid replacement and up to $1,000 if PCM replacement is required.
8. Can a low transmission fluid level trigger the P2736 code?
While low fluid levels can cause transmission issues, the P2736 code specifically relates to an electrical problem in the solenoid circuit.
9. Does the P2736 code require a full transmission replacement?
Not usually. This code typically involves repairing or replacing the solenoid, wiring, or PCM rather than the entire transmission.
10. Will clearing the P2736 code with a scan tool fix the issue?
Clearing the code will reset the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P2736 2015 Chevrolet Silverado OBDII Code
Code P2736 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
