AutoCodes – Buick – P2730 Buick

P2730 Buick Code - Pressure Control Solenoid Valve 5 Control Circuit High Voltage

Quick Answer

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2730 Buick indicates Pressure Control Solenoid Valve 5 Control Circuit High Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 327

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2730 Buick Description

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. The normally low-pressure control solenoid 5 regulates and directs oil pressure to the 1-2-3-4 clutch regulator valve and 1-2-3-4 clutch boost valve. Increasing pressure control solenoid 5 pressure increases pressure to the 1-2-3-4 clutch. The Transmission Control Module varies the current to the pressure control solenoid 5 through a low-side driver. Increasing the current to pressure control solenoid 5 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 5 decreases oil pressure by opening the exhaust port. Pressure control solenoid 5 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected, the high-side driver will reset.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an open or short to voltage on the clutch pressure control solenoid valve 5 control circuit for 1 s.

OBDII Code P2730 Buick - Pressure Control Solenoid Valve 5 Control Circuit High Voltage - AutoCodes.com — P2730 Buick Code - Pressure Control Solenoid Valve 5 Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2730 Buick?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2730 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2730 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2730 Buick code?

Need more information on how to fix the P2730 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2730 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2730 Buick Code

1. What are common symptoms of OBDII code P2730 in a Buick related to the Pressure Control Solenoid Valve 5 Control Circuit High Voltage?

Common symptoms include harsh shifting, transmission slipping, poor fuel economy, and the Check Engine light illuminating.

2. What are possible causes of OBDII code P2730 in a Buick indicating high voltage in the Pressure Control Solenoid Valve 5 Control Circuit?

Potential causes include a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid level, or a malfunctioning transmission control module.

3. How can I diagnose the issue causing OBDII code P2730 in my Buick related to the Pressure Control Solenoid Valve 5 Control Circuit High Voltage?

Diagnosing the problem involves using a scan tool to check for other related trouble codes, inspecting the wiring and connectors for damage, and testing the pressure control solenoid for proper operation.

4. Can driving with OBDII code P2730 in a Buick cause further damage to the vehicle?

Continuing to drive with this issue can potentially cause damage to the transmission, leading to more costly repairs down the line. It is recommended to address the problem promptly.

5. Is it safe to continue driving my Buick with OBDII code P2730 present but no noticeable symptoms?

While it may seem safe if there are no immediate symptoms, it is still advisable to address the underlying issue causing the trouble code to prevent any potential damage to the transmission.

6. What are some repair tips for fixing OBDII code P2730 related to the Pressure Control Solenoid Valve 5 Control Circuit High Voltage in a Buick?

Repair tips include checking and replacing damaged wiring or connectors, ensuring the transmission fluid level is correct, and replacing the pressure control solenoid if necessary.

7. Can I reset the Check Engine light after fixing OBDII code P2730 in my Buick?

Yes, the Check Engine light can be reset using an OBDII scanner after the issue causing the code has been addressed. This will clear the code and turn off the light.

8. How much does it typically cost to repair OBDII code P2730 in a Buick at a professional mechanic or dealership?

The cost of repairing this code can vary depending on the specific issue, but it may range from $200 to $600 at a professional mechanic or dealership, including parts and labor.

9. What is the importance of addressing OBDII code P2730 in a Buick promptly?

Addressing this code promptly is crucial to prevent potential transmission damage, ensure optimal vehicle performance, and maintain fuel efficiency in your Buick.

10. Is it possible to prevent OBDII code P2730 from occurring in the future in my Buick?

Regular maintenance, such as checking and changing transmission fluid as recommended, inspecting wiring for damage, and addressing any related issues promptly, can help prevent the recurrence of this trouble code.